Bedienungsanleitung Wanders Black Stealth (Seite 21 von 64) (Deutsch, Englisch, Holländisch, Französisch)

533283

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

TIMER button to save the pre-set time.

Setting in Fahrenheit or Celsius

The display starts blinking after placing the batteries, or after simultaneously pressing the buttons AUTO

and TIMER. When the display is still blinking, you can switch from Fahrenheit / 12-hour indication to Celsius

/ 24-hour indication. The indication will switch when pressing the AUTO button. The display will switch

automatically to manual operation after some time

Setting the desired temperature

Press and hold the AUTO button until the TEMP indication blinks. You can set a higher temperature with the

 button and a lower temperature with the  button. Then wait a few seconds, or press the AUTO button to

switch to the automatic modus.

Checking the set temperature

Briey press the AUTO button. The display briey shows the pre-set temperature and then displays the room

temperature.

TIMER

You can pre-set a total of four time-settings. When you link up all four time-settings, you can be sure of a

comfortable room temperature at all times.

Press and hold the TIMER button until the indication P1<> blinks. With the  and  buttons you can set

respectively the hours and the minutes. By briey pressing the TIMER button you can browse through the

timer programme P1<>, P1<>, P2<> and P2<>. Here is an example of a possible pre-setting.

P1<>-temp: 07:30 - 08:30 the pre-set temperature

P1<>-temp: 08:30 - 17:00 o

P2<>-temp: 17:00 - 23:00 the pre-set temperature

P2<>-temp: 23:00 - 07:30 o

The TIMER function works only when the pilot ame is on. If the TIMER mode is switched on, the temperature

control will be the same as in the AUTO position. You can switch o the TIMER mode with the  and 

buttons. The remote control will automatically switch to the MAN function.

MAN

When the display shows the MAN position you can manually turn the hearth higher  and lower  by using

the big buttons. When you press and hold the  button the hearth will go to its lowest position: the pilot

ame. When you keep these buttons pressed, you will see the ‘transmit’ symbol top left in the display. You will

know when the hearth has reached its highest or lowest position when the LED of the receiver starts blinking.

Maintenance

Small maintenance

You can clean the outside of the hearth with a damp cloth that doesn’t give o u. Only clean the outside

when the hearth is cold. If some coee is spilled on the unit when it is burning, turn the hearth o immediately.

When the hearth has cooled o completely, you can remove any stains with a damp cloth

Do not use any aggressive cleansing agents or abrasives and do not use stove polish.

Annual maintenance

Your gas hearth needs to be checked and maintained by a certied installer at least once a year. He will check

and, if necessary, clean the following components:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Black Stealth Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wanders Black Stealth

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info