Bedienungsanleitung Wanders Elm (Seite 18 von 60) (Deutsch, Englisch, Holländisch, Französisch)

694497

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Open the combustion air supply (A) opening by sliding it completely to the right. Then open the door by using the

seperate tool and put some balls of paper or  relighters in the stove and place some wood kindling on top. Light

the kindling and leave the stove door ajar (for 3 to 5 minutes) for extra air supply and enhancing chimney draught.

Once the kindling has caught  re you can add extra wood. (Put the logs loosely on the  re so that the  ames can

catch on all around).

How the air valve works

The air slider has three settings, i.e.

1. when slid completely to the right; the primary, secondary and tertiary air supply will be open.

2. when in the middle; only the secondary and tertiary air supply will be open, the furnace will now have the

highest e ciency and the window pane rinser will work best.

3. when slid all the way to the left; all air supply will be closed o and the furnace will slowly shut down.

It is prohibited to light the stove with liquids like petrol or spirits.

Do not have the cooker hood on in the room where you operate your stove.

Never touch the varnished parts when you heat your stove.

Avoid  nger marks

Do not touch the glass of the stove with your  ngers. Finger marks will burn into the glass and cannot be removed

later.

Lighting the stove for the  rst time

Discolouration of walls, ceilings and grates

The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the

dust particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process.

To minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more

information about this.

When you light the Elm for the  rst time, the hearth must still ‘anneal’ and temper itself. The unit has a heat

resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will happen during the

 rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it

is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at least 6 hours when lighting

the stove for the  rst 4 or 5 times. Air the room well when the stove is burning. Make sure that any cooking hood

is not turned on when the stove is burning; a cooking hood extracts the combustion air that the stove needs.

Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove this

deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic

rings. Please make sure you do not leave any  nger marks on the clean glass. Finger marks burn into the glass and

cannot be removed later.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Elm Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info