Bedienungsanleitung Wanders Pecan Eco (Seite 26 von 64) (Deutsch, Englisch, Holländisch, Französisch)

694507

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

same way, only one hole higher (see  g. 10).

7. Take the soapstone panels out of the packaging (use the correct lifting procedures and take care not to injure your back).

8. Place the lower side stones into position. A pin on the bottom plate of the wood-burning stove ensures the stone

remains in place (see  g. 11).

9. Screw the headless Allen bolt into the connection. This bolt will be the connection pin for the second stone (see  g. 12).

10. Place the second stone in position and attach it with another headless Allen bolt (see  g. 13).

11. The upper mounting clamp can be adjusted by loosening the 2 bolts in the slotted holes (see  g. 13a).

12. Replace the steel front plate using the 4 magnets. A pin/hole connection ensures the plate does not sag (see  g. 14).

13. Gently place the 2 upper stones into position on top of the wood-burning stove (see  g. 14).

Assembling the handle (all models):

On the inside of the door you’ll  nd a marking where to drill (use 7 mm drill) the upper hole. The lower hole needs to be drilled

25 mm below that (center to center) (see  g. 18). The handle can be bolted into place using the M6 bolts.

Repairs

Glass replacement

• Open the door,

• Remove the 4 screws on the inside of the door,

• Remove the 2 glass holders,

• Carefully remove the glass from the door,

• Ensure the seal is undamaged and has not come loose. If this

is not the case, reattach the seal with heat-resistant sealant, or

replace the seal completely,

• Place the new glass in position; take the sharp edges of the

glass into account

• Reassemble the various parts.

Inner combustion chamber replacement

Please adhere to the order of removal when removing the panels

from the wood-burning stove;

• Remove the front grille (H)

• Remove the bottom plate (A)

• Remove the front left plate (B) and front right plate (C),

• Tilt the large ba e plate (G) slightly and remove the left rear

plate (D),

• Remove the large ba e plate (G),

• Remove the rear right plate (E),

• Remove the rear wall (F).

• You can leave the small vermiculite ba e plate (I) in place.

Cleaning  ue gas bypass channels

All images can be found on page 58.

• Remove the upper stones from the wood-burning stove (use

the correct lifting procedures and take care not to injure your back) and the lower front plate (this is  xed in place with

magnets)

• On the left and right of the wood-burning stove you will see a number of butter y bolts, unscrew these and remove the

valve (see  g. 15).

• Brush the deposits downwards into the collectors using a brush.

• You can now remove the collectors in the space under the wood-burning stove by unscrewing them (see  g. 16 and 17).

• Reassemble all parts and screw everything tight so  ue gases cannot escape.

• Place the upper stones back into position on the wood-burning stove.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Pecan Eco Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info