Bedienungsanleitung Wanders Ruby (Seite 37 von 64) (Deutsch, Englisch, Holländisch, Französisch)

694500

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

must be covered with  reproof materials all around (about 80 cm). Pay also attention to joisted  oor layers and

any electric wiring.

5. Keep a distance of at least 50 cm (in all directions) between the stove and supporting steel construction parts.

6. Shield o all combustible materials within a radius of 100 cm from the stove openings with non-combustible

materials.

7. Never cover the chimney breast with combustible material (e.g. paper covering).

8. The wall behind the stove must consist of, or be insulated with,  re-proof materials. The insulation material

must resist a temperature of 700 °C and have a density of 80 kg/m3. Please see for insulation materials table

page 41).

Installation

The Ruby is tested in accordance with the international EN 13240 standardization, and has an extra additional

standardization for optimally environment-friendly heating devices related to  ue gases. The stove can be

connected to a  ue tube to which several stoves are connected. The  ue tube has a diameter of 150 mm.

Supply of combustion air

The stove must have enough supply of fresh combustion air. If necessary, make an extra air supply opening as

close to the stove as possible to avoid draught. An extra opening for air supply is always required if:

• the space has a heat recovery system.

• the space has a central exhaust system.

• there is a cooker hood in the same space.

The air supply opening must be closable if it goes through a  re-resistant wall. When there are several combustion

devices in the same space there must be enough air openings to guarantee proper combustion.

External air connection

The fresh air supply channel has a diameter of 100 millimetres. The air supply channel can be  tted via a bottom

or rear connection. If the optional base is used, the connections can be  tted through the base. For the hanging

version, the optional connection cabinet OND.2004 must be installed under the stove. If the external air supply

goes through a  rewall, that channel must be able to be shut o . If the channel is longer than 1 meter, including

a bend of 90 degrees, the channel’s diameter will need to be increased.

Sizes for both situations can be found on page 58.

Connecting the stove

The Ruby is a heavy wood stove. Depending on the version, the Ruby weighs at least 130 kilos, including the

2-meter long smoke-gas discharge. Make sure the wall or  oor that you are installing the stove on can easily carry

this weight. Before installing the stove, follow the directions in the previous chapter ‘Preparation’. Protect your back

and the  oor during installation.

Hanging version:

1. Check the packaging, and report any visible damages.

2. There are 3 di erent boxes for installation (1x the stove + 1x the side panels + 1x the glass plate)

3. Take the stove out of the box (mind your back),

4. Take the wall bracket (sizes on page 58) for the stove out and mount it to the wall,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Ruby Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info