Bedienungsanleitung Wanders Solea Madera (Seite 16 von 55) (Deutsch, Englisch, Holländisch, Französisch)

533641

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Your Solea Madera wood-burning

stove at a single glance

The Solea Madera

The Solea Madera is a combination of comfort and

efﬁcient heat output. The stove has an outside cover and

an interior chamber. This ensures that the stove radiates

70% of the heat output through convection to your

room while the remaining 30% heat is released through

radiation via the glass area. The automatic thermostat

valve regulates the air supply to your wood-burner when

all other openings are closed. Open the valve completely

when lighting the stove. Once the stove has heated

up, the valve will close automatically to minimize the

chance of overheating while you can enjoy the sight of

a generous ﬁre.

In addition to the thermostat valve, the Solea has a

preheated glass pane cleaning system and an ingenious

extra air circulation system which uses ﬂue gases for

afterburning. High-quality cast iron and the vermiculite

internal lining ensure optimum heat yield.

The Solea can make a 360° turn if the stove is placed on

a solid ﬂoor and straight under the chimney ﬂue. Be sure

that the stove is not in operation when its glass panel

faces the wall. You can unlock the Solea with the knob

on the right hand side of the base for each 30° turn to

the left or to the right.

Please note: The glass side of the hearth must never face

the wall during lighting and for the following two hours

after.

Installation

It is common practice for the dealer where you purchased

your stove to also take care of installing it. If this is not

the case, please ensure that the installation is done by a

certiﬁed installer. A certiﬁed installer can also give you

the right advice about the ﬂue tube to which the stove

must be connected. Connecting wood-burning stoves

by unqualiﬁed persons is prohibited, in which case we

cannot give any guarantee about proper functioning

of your stove. Please bear the ﬁre safety in mind when

installing the stove. See also page 19.

The wood-burning stove is suitable as an extra heat

source and does not replace your principal heating

device.

It is not allowed to have wood-burning stoves connected

by unqualiﬁed installers. In such case we cannot give

any guarantee that the Solea will work properly.

Lighting your stove early in autumn or late in

winter

When the external and internal temperatures do

not differ much, a proper chimney draught is a real

challenge. You can help chimney draught get started

by burning some wood while keeping all air inlets

maximally open. An abundant air supply speeds up

quick heating which in turn increases the draught

in the chimney. Lighting up the stove with only a

little wood prevents smoke from streaming into the

room.

Lighting the stove

The stove will become very hot when you light it and

will need at least two hours to cool off. Don’t touch the

stove without protection during ﬁring and for two hours

after. Handle the stove always with a glove to avoid

getting serious burns.

The automatic thermostatic valve

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Solea Madera Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wanders Solea Madera

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info