Bedienungsanleitung Wanders Vero (Seite 17 von 59) (Deutsch, Englisch, Holländisch, Französisch)

533643

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Your Véro stove at a single glance

The Véro 33 Serpentino

The Véro is a combination of comfort and efﬁcient heat

emission. The large glass panes allow emission of the

heat from the stove directly to the environment to make

your room instantly comfortable. The built-in ﬂue gas

deﬂector ensures circulation of ﬂue gases in the interior

parts. Combined with the extra after-burning, it means

that the ﬂue gases have better combustion and reduce

the burden on the environment. You can regulate the

intake of combustion air with the integrated air slide

valve and adjust the intensity of the ﬁre and the output

of your stove.

Installation

It is common practice for the dealer where you purchased

your Véro stove to also take care of installing it. If this is

not the case, please ensure that the installation is done by

a certiﬁed installer. A certiﬁed installer can also give you

the right advice about the ﬂue tube to which the stove

must be connected. Connecting wood-burning stoves

by unqualiﬁed persons is prohibited, in which case we

cannot give any guarantee about proper functioning of

your Véro stove. Please bear the ﬁre safety in mind when

installing the stove. See also page 22.

The wood-burning stove is suitable as an extra heat

source and does not replace your principal heating

device.

Usage early in autumn or late in winter

When the external and internal temperatures do

not differ much, a proper chimney draught is a real

challenge. You can help chimney draught get started

by burning some wood while keeping all air inlets

maximally open. An abundant air supply speeds up

quick heating which in turn increases the draught

in the chimney. Lighting up the stove with only a

little wood prevents smoke from streaming into the

room.

Lighting the stove

The stove will become very hot when you light it and

will need at least two hours to cool off. Don’t touch the

stove without protection during ﬁring and for two hours

after. Handle the stove always with a glove to avoid

getting serious burns.

Before lighting the ﬁre, you must clean away any deposits

on the window pane with a paper from a kitchen roll.

The same paper can be used for lighting the ﬁre.

Open the combustion air inlet. Open the slide to its

maximum before lighting the stove. Then open the door

and put some balls of paper or ﬁrelighters in the stove

and place some wood kindling on top. Light the kindling

and leave the stove door ajar (for 3 to 5 minutes) for

extra air supply and enhancing chimney draught. Once

the kindling has caught ﬁre you can add extra wood.

(Put the logs loosely on the ﬁre so that the ﬂames can

catch on all around).

How the air valve works

The air valve has 3 positions:

1. Opened all the way: the primary and secondary air

supply is open.

2. Pressed until the ﬁrst click is heard: only the sec-

ondary air supply is open and the stove will pro-

duce the highest yield while the glass cleaning sys-

tem works optimally.

3. Pressed until the second click is heard: everything is

closed, and the ﬁre will go out slowly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Vero Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wanders Vero

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info