543469
18
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
Wanscam IPCAM User Manual
For example: If the
is a bright , indicating the device is the first way to monitor the
status.
When you log on the operator interface, you can perform PTZ and video parameters
Direction control: Click the arrows in different directions can be the lens to the
appropriate direction of rotation
Vertical cruise Level cruise
1. Image mirror indicates a reverse image.
2. Resolution, mode, brightness, contrast default setting are320*24050HZ64
mode is mainly for the adjustment of Light strength, please adjust to 60HZ when light is
poor or in dark.
3. There are 3 browse modes in IE mode: visitor, operator, administrator, the authority
of administrator is the highest, log in different authorities, the operation will be
different. Regarding to 3 user authorities, please refer to 3.4.4. Equipment User
Administration.
If you want to see 4-way,or 9-way you can click the icon
or
OSD: In the video display date and time. You can disable the OSD function or choose the
color of OSD.
Snapshot Photo: Click the icon
interception photo.
Video: Click
icon to enter the recording mode, the icon becomes again, click
the end of the recording.
8.1. Manager Operation
When you logged on as Administrator, click on “Administrator action” to enter setting
interface. Device Information: You can see the device serial number, equipment systems
and device firmware version of the application firmware version of the.
Alias setting : You can set your favorite device aliases.
Date&Time set : seting the date and time.
Uer settings : Can be set up to 8 users. On this page you can set up accounts of the user
name, password, as well as in their packet (administrator, operator, visitor).
z Visitor : In this mode, you can only visit.
z Operator :You can set the direction of the lens device, set the video screen’s
brightness, contrast and other parameter.
z Administrator : You can set the device advanced configuration.
UPnP set :If you want internet access IPCAM, to ensure that the state is successful UPnP.
Device Firmware Upgrade: The system firmware update the device firmware and
application of
Restore factory settings : When there is not a response when the error occurred, you can
restore the factory settings to resolve the device.
18
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Wanscam AJ Series IP Camera wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Wanscam AJ Series IP Camera

Wanscam AJ Series IP Camera Kurzanleitung - Englisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info