2.1.1. Search the IP address of the camera.
!
When the device has been mounted properly, you can double click the Icon “" ”
run this IP address search tool.
!
Figure 2.1
!
Note: The software searches IP Servers automatically over LAN.
There are 2 cases:
1. No IP Cameras found within LAN. After about 1 minute search, the Equipments List Field
not show the IP address.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total
number is displayed in the Equipments list field as shown in Figure 2.1
!
Note：
1. Current Computer indicates the Computer’s IP Address information.
2. Equipment information indicates the IP camera’s IP Address information.
3. If you find that the camera’s “Subnet Mask”, “Gateway”, “DNS Server” is not as some
as your current computer’s. You need try to change the camra’s IP address.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router’s or your
current computer’s.
4. If you don’t know how to configure your camera’s IP address. You can click “ Update”
button. The Search Tool software can help you configure a usable IP camera automatically.
!
!
