Bedienungsanleitung WASPcam 9995 Gideon Remote (Seite 1 von 1) (Englisch)

572008

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

MODE/SLEEP

SET

12H

24H

Product Overview

FCC Statement

Modications not approved by the party responsible for compliance

could void user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits

for Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio or television reception, which can be determined by turning the

equipment on and o.

The user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure

Statement

The product comply with the FCC portable RF exposure limit set forth

for an uncontrolled environment and are safe for intended operation

as described in this manual. The further RF exposure reduction can be

achieved if the product can be kept as far as possible from the user

body or set the device to lower output power if such function is

available.

RC Watch

Quick Start Guide

SET

SETUP

BINDING

SEL OK STOP

SET button

PHOTO button

Charging port

MODE/SLEEP

button

Charging Battery

When the battery power is running low, do the following to charge the

battery:

1. Open the charging port cover.

2. Connect one end of the Pogo cable to

the charging port of your watch.

3. Connect the end of

the Pogo cable to

the USB port of

a computer or

AC adapter to

charge battery.

LEFT button

VIDEO button

RIGHT button

Clock Mode

In this mode, this watch can be used as a clock, stopwatch, countdown

clock, and alarm clock.

Set Date and Time

1. Press and hold the SET button to enter the setting mode.

2. Press the RIGHT button repeatedly to

select the field that you want to adjust.

3. Use the VIDEO or PHOTO button to

adjust the value or set time format or the

color of the LED clock display.

4. Repeat steps 2-3 to adjust other fields.

5. Press the SET button to save your changes.

Stopwatch

1. Press the LEFT button repeatedly to switch to

Stopwatch mode.

2. Press the VIDEO button to start the timer.

3. To record a lap while the timer is running,

press the RIGHT button. It displays the last

lap time.

• Repeat this step to create a new lap. You can

record up to 12 laps.

4. To stop the timer, press the VIDEO button.

5. To reset the timer, press the SET button.

Countdown Clock

1. Press the LEFT button repeatedly to switch to Countdown Clock

mode.

2. To start the countdown, press the VIDEO

button.

3. To pause the countdown, press the VIDEO

button.

• To resume, press the VIDEO button

again.

• To reset the countdown, press the SET button.

Setup Mode

In this mode, it allows to pair with a camera, set auto power off,

enable/disable sound, and adjust the brightness setting.

Pair with Camera

1. On your camera, press the Mode button

repeatedly to change to SET mode.

2. Press the Shutter button to enter SET mode.

3. Press the Mode button to highlight MORE. Then press the Shutter

button to enter the MORE menu.

4. Press the Mode button to highlight BINDING.

5. Press the Shutter button to enter the BINDING submenu. The

camera RF antenna is enabled and ready for pairing.

6. On your RC watch, press the MODE button

to switch to Preview mode.

Then press and hold the SET button to

enter to SET mode.

7. Use the LEFT or RIGHT button to

select Pairing and press the VIDEO button

to enter Pairing menu.

8. Use the LEFT or RIGHT button to select the

preview window that you want to pair with

your camera and press the VIDEO button

to start pairing.

9. When pairing is complete, press the SET

button to return to SET mode. Then press

the SET button to switch to Preview mode.

10. Repeat Step 7~9 to add more cameras. You can pair up to 6 cameras.

Alarm Clock

1. Press the RIGHT button repeatedly to switch

to Alarm Clock mode.

2. To activate an alarm, press the VIDEO button

to select ON.

To set the countdown time, do the following:

a. Press and hold the SET button. Then

press the RIGHT button repeatedly to

select the field that you want to adjust.

b. Use the VIDEO or PHOTO button to

adjust the value.

c. Press the SET button to confirm.

To set the alarm time, do the following:

a. Press and hold the SET button. Then

press the RIGHT button repeatedly to

select the field that you want to adjust.

b. Use the VIDEO or PHOTO button to

adjust the value.

c. Press the SET button to confirm.

To unpair or remove the paired camera, do the following:

a. In SET mode, use the LEFT or RIGHT

button to select Pairing and press the

VIDEO button to enter Pairing menu.

b. Use the LEFT or RIGHT button to

select the assigned preview window

that you want to unpair.

c. Press the VIDEO button to confirm.

Set Auto Power Off

1. Press the MODE button to switch to Preview mode.

Then press and hold the SET button to enter to SET mode.

2. Use the LEFT or RIGHT button to select

Auto off and press the VIDEO button to

enter Auto Power Off menu.

3. Use the LEFT or RIGHT button to select

the desired setting and press the VIDEO

button to confirm.

Enable/Disable Sound

1. Press the MODE button to switch to Preview mode.

Then press and hold the SET button to enter to SET mode.

2. Use the LEFT or RIGHT button to select

Sound and press the VIDEO button to enter

Sound menu.

3. Use the LEFT or RIGHT button to enable/

disable sound and press the VIDEO button

to confirm.

Adjust Brightness Level

1. Press the MODE button to switch to Preview mode.

Then press and hold the SET button to enter to SET mode.

2. Use the LEFT or RIGHT button to select

Bright and press the VIDEO button to enter

Brightness menu.

3. Use the LEFT or RIGHT button to select the

brightness level and press the VIDEO button

to confirm.

Number color

Time format

Pairing

1 23

456

1 23

456

Pairing

AutoOff

sec

Bright

Sound

Specifications

General

Function Remote control

Living View

Basic time function: Time, Stopwatch ,Timer, Alarm

Working Range 3m

RF Module 2.4GHz

IO Terminals PoGo pin USB

Status OLED 1.29”, 128.96 dot

Power Source Polymer Battery 370mAh, 3.7V dc

Stream Format Motion JPEG 128*96 pixel, 8fps

Video Aspect 4:3

Ratio

Power Saving Auto Sleeping in 5/10/30/60s/never

Charging Time Approx. 2 hours

Battery Life Living living view continuously: 1.5 hours

Time without sleeping: 6 hours

Standby time in sleeping mode: up to 6 months

Troubleshooting

Problem Possible Cause Solution

A black screen

appears on the

screen and all

buttons are inactive.

The screen appears

unusually and all

buttons are inactive.

The battery is running

out.

The watch is shutting

down.

The micro SD card is

not inserted.

The battery is running

out.

Connect pogo cable

and the battery will

start charging after 10

seconds.

Connect the end of the

Pogo cable to the USB

port of a computer.

After 10 seconds, the

watch will restart.

Insert a micro SD card

into camera card slot.

(Note: If you use

internal memory to

record video, the live

view will disappear

when you start

recording.)

Connect the pogo

cable to charge battery.

Live View Mode

When the devices are paired, the live view appears on the screen and

you can use this watch as a remote control to record videos or capture

photos.

1. Press the MODE button to switch to Preview mode. The live view

appears on the screen.

2. Do the following:

• To record videos:

Press the VIDEO button to start recording.

Press the VIDEO button again to stop video

recording.

• To capture photos:

Press the PHOTO button.

(orange) - card full

(blue) - recording

(gray)- standby (already

connected to camera)

(black)- disconnected

Live view icon indicators

Video button and Photo button in Live view mode

RC Watch

Video Button Photo Button

Video

Photo

Burst

Time Lapse @ video

Time Lapse @ photo

Self Timer

Looping

Set up/Wi-Fi…

Note: With PIV (Photo In Video) feature, you can take a photo when you

are recording a video.

Video

Start/Stop

Video

Looping start/stop

Video

Photo

Note: “PIV” is available when

camera is recording.

Photo

Burst

Photo

Note: PIV is available when

camera is processing Time

Lapse @video.

Photo

Self Timer

N/A

Photo

Action Cam Mode

WASPcam 9995 Gideon Remote Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von WASPcam 9995 Gideon Remote

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info