AirC: Calibration of the internal probe
The calibration must be done after 1 day working with
the same setting temperature in accordance with the
following description:
Put a thermometer in the room at 1.5M distance from
the floor (like the thermostat) and check the real
temperature in the room after 1 hour.
When you enter on the calibration parameter “no” is
displayed on the right to indicate no calibration has
made.
To enter the value shown on the thermometer, use the
(-) or (+) keys to enter the real value. Then, press (Ok)
to confirm.
The message “Yes” should be displayed; the value will
be stored in the internal memory.
If you need to erase a calibration press on the escape
key ( ).
The old value will be erased and the message “no” will
be displayed.
* Pay attention:
