Bedienungsanleitung Watts BT-FR-02 - Wireless Flush Receiver (Seite 5 von 31) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

805476

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

3. Installation and RF Initialisation rules

Install and connect the receiver respecting the following guidelines to guarantee an optimal reception:

- The receiver must be mounted at a minimum distance of 50cm of all others electrical or wireless materials

like GSM, Wi-Fi router.

- Wiring work related to the receiver must be carried out only when de-energized

- Connect your receiver to the power supply.

Depending on your installation, an order of pairing must be respected to ensure a correct RF signal transmission.

Installation 1: Receiver + RF thermostat

1. Switch on the receiver.

2. Press the RF button during 5 sec to switch to RF Init.

3. The RF LED should be Green fixed or orange blink indicating that the Receiver is now in radio configuration

mode waiting for a thermostat configuration address.

4. Please refer to the thermostat leaflet for enter the thermostat in “RF Init” mode.

5. The receiver RF LED must be switched OFF and the thermostat should exit the RF init mode to indicate

correct paring between both elements.

You can pair several receivers to the same RF thermostats

Note for installations 2, 3 and 4: You can pair several receivers. Pay attention! Before linking a new receiver with the

Central unit, you have to reset the receiver imperatively.

Installation 2: Receiver + RF Thermostat + RF Central unit for heating regulation

1. First step is to pair the RF thermostat to the Central unit

2. Press the RF button on the receiver during 5sec.

3. The RF LED should be Green fixed or orange blink indicating that the Receiver is now in radio configuration

mode waiting for a central configuration address.

4. Please refer to the leaflet of the Central unit for more explanation about the pairing mode “RF Init”. You must

pair the Receiver as a heating device in the Central unit

5. The RF LED on the receiver will switch OFF and the Central will show a message to indicate correct pairing

between both elements.

You can pair several receivers in the same room.

Installation 3: Receiver + RF Central unit for ON/OFF or light control

1. Press the RF Button 5sec to switch the Receiver in RF Init mode .

2. The RF LED should be Green fixed or orange blink indicating that the Receiver is now in radio configuration

mode waiting for a central configuration address.

3. Please refer to the leaflet of the Central unit for more explanation about the pairing mode “RF Init”. You must

pair the Receiver as an ON/OFF plug or a light in the Central unit

4. The RF LED on the receiver will switch OFF and the Central will show a message to indicate correct pairing

between both elements.

You can pair several receivers in the same room. Receiver will work in Timer mode; you have the possibility to create a

weekly program for ON/OFF period.

Installation 4: Receiver + RF Central unit for heating regulation. Only valid for the Flush receiver with floor sensor

1. Press the RF Button 5sec to switch the Receiver in RF Init mode.

2. The RF LED should be Green fixed or orange blink indicating that the Receiver is now in radio configuration

mode waiting for a central configuration address.

3. Please refer to the leaflet of the Central unit for more explanation about the pairing mode “RF Init”. You must

pair the Receiver as a heating device in the Central

4. The RF LED on the receiver will switch OFF and the Central will show a message to indicate correct pairing

between both elements.

Remarks:

- In case of a thermostat in RF Alarm, the receiver (BT-PR02 RF, BT-FR02 RF or BT-WR02 RF) will follow

20% cycle of heating to prevent the installation against frost. (The receiver will stay in OFF mode if it was in

OFF before the loss of RF communication).

- The leds are switched off between 8pm and 8am when using a BT-DP02 RF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Watts BT-FR-02 - Wireless Flush Receiver Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info