805500
4
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
PPLIMP2350Bb page 27
GB
2. REFERENCES, SYMBOLS AND ABBREVIATIONS
For better understanding in this document references are used in the form of symbols and abbreviations, which are
described below.
Reference to further documents
FBH
Floor heating
Important information and application hints
FH
Radiant heating (general)
Safety information or
Important information about functions
FRG
Hydraulic control unit with pump and mixing
valve
OK-button (OK)
HKV
Manifold
Control button Left (◄)
MuB
Installation and operation manual
Control button Right (►)
TB
Temperature limiter
Plus button (+)
UWP
Circulation pump
Minus button (-)
WE
Boiler / heat generator
3. SAFETY INSTRUCTIONS
The controllers are neither splash- nor drip-proof. Therefore, they must be mounted at a dry place.
Do not interchange the connections of the sensors and the 230V connections under any circumstances! Inter-
changing these connections may result in life endangering electrical hazards or the destruction of the appliance
and the connected sensors and other appliances.
4. DISPLAY
1: Operating modes
2: Keyboard is locked
3: Service Installation Menu
4: Manual operation / program override active
(display of temperature offset)
5: a) display temperature (°C / °F)
b) display time (12 h / 24 h)
6: Type of temperature displayed
a) Water temperature
b) Outside temperature
c) Room temperature (if RF room thermostat con-
nected)
7: Program graphic of the current day
Comfort temperature
Reduced temperature
8: Pump indicator
9: Mixing valve activity indicator
Valve actuator is opening
Valve actuator is closing
10: Current day of the week (1 = Monday; 7 = Sunday)
11: RF reception indicator (optional).
12: a) Symbol temperature indication in °C / °F
b) Symbol AM / PM if 12 h mode
13: a) Outside temperature (°C / °F)
b) Time (12 h / 24 h)
Fig.3
160, mm
86 mm
47 mm
OK
1
2
3
4
5
6
7
8
9
10
11
12
13
a
b
c
Details Pos. 6
6
Fig.2
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

watts-climatic-control-h

Suche zurücksetzen

  • Der Motorschieber Fährt bei höheren Außentemperaturen zu , aber öffnet dann bei niedrigeren Temperaturen nicht mehr . Ich muss dann die Anlage einmal per Hand Auf und zu Fahren . Danach arbeitet sie wieder bis zum nächsten Temperaturwechsel . Was kann dass sein ? Eingereicht am 23-2-2025 13:31

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Watts Climatic Control H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info