Bedienungsanleitung Watts Climatic Control H (Seite 8 von 15) (Englisch)

805500

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

PPLIMP2350Bb page 31

ABSENCE/VACATION mode of operation

Time-limited operation of REDUCED TEMPERTURE mode .

Duration can be set between 1 and 24 hours and up to a maximum of 44 days. Upon expiration of this

period the Controller switches over to operating mode .

By means of the arrow keys (◄) the cursor is first moved to . Then appears on the display at 13.

The duration of absence can be changed using buttons (+) or (-) .

Example: = 1 hour; = 1 day

Both symbols and start blinking. The remaining time is displayed at 13.

To discontinue this mode of operation before time you have to set the remaining time at 13 to using

the (-) key.

STOP mode

This mode is used to switch off the system.

The device switches off the system. The Controller software version is indicated on the display for about 3

seconds and then switches off (no indications).

By pressing any of the keys the Controller can be switched on.

ATTENTION: When the Controller is switched off the heating system could freeze!

6.4 PROGRAM MENUS

By means of the arrow keys (◄) and (►) you scroll through the program menus. The cursor should be positioned

on the symbol you wish to select.

TIME AND DATE Program menu – setting

In this menu you can set the actual time and date as well as the day of the week.

Using the cursor select first and then press the (OK) key.

By keys (+) or (-) set the minutes; confirm by pressing (OK).

By keys (+) or (-) set the hour; confirm by pressing (OK).

By keys (+) or (-) set the day of the week; press (OK) to confirm.

PROGRAMMING menu

In this menu you choose the program of the Controller (duration of the periods for operation in reduced

temperature and heating mode), which is to be followed in operating mode . You can choose between

factory set programs from P1 to P9 ( 6.2.1.) and one of the user’s programs from U1 to U4.

First you select with the help of the cursor. The indication appears at 5. Press the (OK) key and the

indication starts blinking. By the keys (+) or (-) now you can select the program you need and confirm it

by pressing (OK).

User-defined Programs (U1 – U4)

If you choose one of the user programs from U1 to U4, you can program the REDUCED temperature and

NORMAL heating times directly. Proceed as follows:

At 13 the time indication blinks and day 1 is highlighted, while at 7 the time cursor blinks at 0 h on the

symbol (heating mode). Pressing the (-) key you can move the time cursor to the symbol (REDUCED

temperature mode). Then the time cursor jumps to the next hour. Thus NORMAL and REDUCED tempera-

ture cycles are selected using the (+) and (-) keys.

Using arrow keys (◄) and (►) you can select the time in the same manner.

When day 1 programming is completed the time cursor switches automatically to 0:00h of day 2. Thereby

the programmed values for day 1 are stored. Programming other days is done using identical procedure

moving the cursor by pressing (►). When you switch over to programming the next day the program for

the previous day is saved. On completing the programming of the last day 7, the indication first switches to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Watts Climatic Control H Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info