MILUX RF
General safety information
The instructions
theses instructions
This product must be used ex to regulate heating installations.
Other use is not c
Contents
1. Product characteri
2. Display
3. Keypad
4. First use
5. RF Configuration
6. Standby switch
7. Operating modes
7.1. TIME SETTING m
7.2. COMFORT Mode
7.3. REDUCED Mod
7.4. AUTOMATIC Mod
7.5. PROGRAM Men
7.6. ANTIFREEZE Mode
8. Special functions
8.1. HOLIDAY functio
8.2. Keypad lock
8.3. Cooling function
8.4. RESET function
9. Battery replacement
10. ITCS function (opti
11. Technical characteristi
12. Problems and soluti
13. Recycling
14. Annexes
1. Product characteristics
W
the installation.
W
9 built-in programs
4 user program
Program graphic displ
Room temperature
Comfort / Reduce
Temporary tempe
Automatic or
Holiday function
Keypad lock functi
Battery operated > 2
Low batter
Battery without loss of program except t
hour
« O / I » switch f
Intelligent Temp
2. Display
[1 ] : Operating m
[2 ] : Temporar
[3 ] : Heating in
[4 ] : Room tempe
[5 ] : Cooling indi
[6 ] : if displayed , [4 ] indicates t
[7 ] : Holida
[8 ] : Current da
[9 ] : Hour
[10 ] : Daon ly available
[11 ] : Low batteri
3. Ke
4. First use
Check that the batte
Put the switch on « )
Adjust the date and t
Do the thermostat R configuration with the receiver (Se chapter 5. RF
configuration)
The thermostat is rea for operation. T default oper mode is the
automatic “P1 ”, (see
“P1 ” in the annexes )
You
PROGRAM Men
5. RF configuration
Put the receiver(s) to c in RF configu m (see
receiver’s leaflet).
On . P
on (OK ) key. If you are in RF configuration mode, the message «
» must appear. The thermostat sends it
configuration ad .
Check on the receiver tha the configuration is well done (see
receiver’s leaflet).
Verify radio the wanted
room to regulate t
“ ” is . Close the doors and come to
the receiver. Check
o If
installation is func
o If
the range limit.
o If the LED doesn’t blink, you are out of range lim Bri
imperatively
Press (OK ) k
Now, you thermost
6. Standby switch
This switch is locat:
To put the product in st put the switch on «O » positio The sc
switches off t+ ), (- ), (◄) and (►) b
inactive. A press on (OK ) displa briefly the ambient temp
and the hour, tog pictogram:
To activate the pro put the s on « I » positio 3 se the
software version will be displayed. Then, the thermost c back in the
selected operatin
WARNING: In tby mode,
7. Operating modes
Use the navigati(◄) o r (►) to change th
7.1. TIME SETT
Press (OK ) t.
Set minute value + ) and (- ) ke
Press (OK ) k
Set hour value + ) and (- ) k
Press (OK ) k
( (►) key allows to
W
Set day value + ) and (- ) keys
(1=monday, 2=, …)
Press (OK ) k
7.2. COMFORT :
In this mode, th applies co se temperat indefinitely. B
pressing (+ ) or (- ) keys
The ambient temp is displayed after f
A press on (OK ).
To apply tempo
7.3. REDUCED Mode :
In this mode, the th
By + ) - )
the COMFORT temperat The a temperature is displa after f
seconds. A press on (OK ) k al th displ of reduce setpoin
temperature.
To apply temporaril
7.4. A:
The thermostat follows the chosen program (see chapter 7.5 for the progra
selection / edition)
By + ) and - ),
program step:
The pictogram is displa
At the n pictogram
carry on.
7.5. PROGRA:
Press (+) or (-) k
= Comfort setpoint
= Reduced setpointe REDU
If program press ( OK )
program in the aut .
A light weekl
Morning, Evening & Wend
Morning, Midi, Eveend
Morning, Evening
Morning, Afternoon & Wend
8h - 19h, Satu
W
A detailed programs
If « U1 à U4 », OK ) k
mode :
W( a( mo
that you want to m
WOK ) key.
Daily version: the day’s pr
Weekly : you u
validate
automatic mode (see chapter 7).
7.6. A:
In this mode, th
pressing + ) - )
COMFORT temperature. The ambi temperature is displayed aft f
seconds. A p on (OK ) k allows the o the a setpoint
temperature.
To apply temporaril».
