Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: info@aktobis.de
Please switch off the unit immediately and disconnect it from the
mains/power supply if anything seems to be wrong !!! In this case, please
contact a specialist and do not try to repair the unit yourself !!!
Examples: Fan does not run during operation or fuse has blown.
Instructions for use:
1. Operational environment
- The maximum operating temperature should not exceed +40°C !
- The maximum relative humidity should not exceed 90% !
- The unit should not be operated at altitudes higher than 1,000 metres above sea
level !
- The unit was developed exclusively for indoor use and not for outdoor use !
2. Commissioning
2.1. Position the fan so that the airflow flows in the desired direction after switching on.
Please note that the front side (exhaust air) of the fan is marked with the trademark.
The transport handle and the on/off switch are located at the rear of the fan.
Adjustment of the air flow:
The fan head can be swivelled from top to bottom and thus the air flow can be tilted in
any desired direction. To change the airflow in a desired lateral direction, it is sufficient
to slightly change or adjust the standing position of the unit.
2.2. Now insert the mains plug properly into the socket.
2.3. The fan is switched on by a rotary switch located on the back of the unit. Point the
rotary switch in the direction of the arrow to the desired operating position.
O = Unit OFF
1 = Unit ON in weak fan stage
2 = Unit ON in medium fan stage
3 = Unit ON in strong fan stage
