Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Functional description of the control panel:
A. TIMER (remaining time/start time 1-24 hrs.) 1. Signal light when timer is activated
B. Setting the operating strength 2. Signal light for high operating strength (H)
C. Setting the operating mode 3. Signal light for medium operating strength (M)
D. On / Off button 4. Signal light for low operating strength (L)
E. Without function on this model 5. Signal light when automatic mode is activated
F. SLEEP = Low-noise night operation 6. Signal light when cooling mode is activated
G. Display / display panel (temperature etc.) 7. signal light when fan operation is activated
H. UP button for increasing the room temperature 8. Signal light for dehumidification mode
I. DOWN button to lower the room temperature 9. Signal light when the water tank is full
10. signal light for active compressor operation
11. no function on this model
12. signal light when night mode is activated
Instructions for use:
1. Commissioning
1.1. Insert the mains plug properly into the socket.
1.2. Check that the exhaust hose for the warm exhaust air is properly installed (see page 4-5 of the instructions
for use).
1.3. Make sure that the horizontally mounted outlet louvres are open towards the desired direction.
1.4. Press the ON/OFF switch. The air conditioner switches on and the default setting Automatic mode with
medium operating strength starts to work. The default target temperature is 24°C. At the same time, the
operation/signal lights turn on. (Note: The room temperature display panel can display values from 0°C to
50°C. )
