Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: info@aktobis.de
Instructions for use:
1. Operational environment
- The maximum operating temperature should not exceed +40°C !
- The maximum relative humidity should not exceed 90% !
- The unit should not be operated at altitudes higher than 1,000 metres above sea
level !
- The unit was developed exclusively for indoor use and not for outdoor use !
2. Commissioning
2.1. Position the fan so that the airflow flows in the desired direction after switching on and
make sure that the fan is placed on a firm and level surface !
2.2. Now insert the mains plug properly into the socket.
2.3. The fan is switched on by pressing the On/Off button and starts by default in normal
operating mode and with low operating power.
2.4. You can set three different operating modes with the Mode button:
- Nor. = Normal operation (at desired operating strength)
- Nat. = Natural operationis simulated, the fan independently switches back and forth
between different operating strengths.
- Sleep = alternating operation The fan switches sequentially from the highest
operating level to the medium and low operating levels. This cycle is repeated.
2.5. Use the speed button to set the desired operating strength / air circulation. (Only
possible in normal operating mode) !
You have the choice between three operating strengths:
- Low = Low operating strength / air circulation
- Mid. (Middle) = Average operating strength / air circulation
- Hi. (High) = Highest operating strength / air circulation
