Bedienungsanleitung Webasto Air Top 5000 ST (Seite 3 von 4) (Englisch)

802202

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Switch on

General

Switch off

Operation

Error code

Set time/date

View time

Program

Start time

View/Delete

selected

times

Program

operating

time

Set remaining

time

Remote control

Vehicles with

ADR

equipment

Manual: Press the (permanent heating mode)

Automatic: By programming the start time

The combination timer allows the heater start time to be selected for

a period of up to seven days. Three cut-in times can be programmed,

although only one of them may be activated.

The combination timer has a temperature setpoint generator.

When the ignition is switched on the timer shows the current time

and the day. If the heater is operating the display and the buttons

are lit.

When the timer is connected to the power supply all the symbols in

the display will flash. The time and day must be set. The display

remains blank in ADR vehicles.

The operation of the timer is designed such that all the flashing

symbols can be adjusted using the and buttons. If no button is

pressed for five seconds the displayed time is saved. If the and

are pressed for longer than two seconds, they will switch to high

speed adjustment.

If the ignition is switched off whilst the heater is in permanent heating

mode, a remaining operating time of 15 minutes will appear on the

display and the heater will continue to operate.

On heaters that output an error code (Air Top 3500 ST /

Air Top 5000 ST), a number, the error code, may appear in the

display. In this case you should visit a Webasto service outlet.

Manual: Press the button again

Automatic: By programming the operating period

When the heater is operating: By setting the remaining time

Press the button for more than two seconds the time will flash

set the time using the and buttons the day will flash set the

day.

Ignition off: Press button.

Press button program number will flash set the start time using

the and buttons the day will flash set the day.

If you press the button several times you can set program

numbers 2 and 3 or go to time mode.

Press the button several times until the required program number

is displayed.

To delete the selected time press the button until the time is

displayed with no program numbers.

The heater must be switched off. Press the button for three

seconds the operating duration will flash set the required operating

duration using the and buttons (10 to 120 minutes).

Set the required remaining time (1 to 120 minutes) using the

and buttons. The remaining time is the time that the heater will

continue to operate. It can only be changed whilst the heater is

operating and the ignition is off.

Possible using an external optional immediate heat button.

It is not possible to set a time on ADR vehicles. The remaining time

will be shown on the display whilst the heater is operating. The time

can be adjusted.

Combination timer

Combination

timer

Indicator

Temperature

selector

Forward

Immediate

heat

Return

Program selector

Time

Program number

Day

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Air Top 5000 ST Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Webasto Air Top 5000 ST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info