Bedienungsanleitung Webasto BlueCool Connect (Seite 5 von 12) (Englisch)

802211

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Installation | 6

2510264A OI-II BlueCool Connect_draft12 5 / 12

6 Installation

6.1 Hardware Installation

Unpack all components and check for completeness and dam-

age. See also: Fig. 2)

NOTE

Check the area behind the drilling location to prevent

damage to cables, hoses and pipes.

1. Find a suitable location for BlueCool Connect (BCC) inter-

face box (1), taking a suitable location for the antenna (2)

into consideration. You have a 3 m long cable to connect

the antenna to the BCC interface box.

2. Drill the holes for mounting the BCC interface box.

3. Position the BCC interface box so that any condense water

inside can exit the box; for instance by pointing the con-

nectors towards the floor.

4. Mount the BCC interface box, using suitable screws, or

bolts and nuts.

5. Connect the power cable (3), securing the cables in such a

way that their connectors cannot be pulled out under any

circumstances. You must do this to fulfill ABYC (American

Boat and Yacht Council) requirements.

6. For more connection details, see the label on the box for

connections.

7. Connect the CAN bus (5). See the label on the box for the

connections.

8. Connect the NMEA (National Marine Electronics Associ-

ation) 2000 bus (4). Note that the NMEA 2000 bus is not

available in the first release.

9. Connect the LAN (Local Area Network) Ethernet cable (6).

10. Find a suitable location for the antenna (2), making sure

not to position the antenna on a metal surface, and then

mount the antenna securely.

11. Connect the antenna to the BCC interface unit using the 3

m long antenna cable.

NOTE

You must connect the antenna even if you do not use

mobile connectivity; it may damage the antenna ampli-

fier if you use it without the antenna being connected.

The USB ports (7) on the BCC interface box are currently

without function but live at 5 V.

There is a reset button on the BCC interface box to restart it.

6.2 Software installation

An app enables you to control your BlueCool Connect from your

iOS or your Android device.

Example of the app on a mobile device

To install the app:

1. Verify if your mobile device (smartphone, tablet, and so on)

is connected to a network (an internet connection must be

available). Alternatively scan the appropriate QR code be-

low.

2. To access the relevant app store:

Browse to the Apple App store https://blue-

cool.webastoconnect.com/apps/ios and search for "Blue-

Cool Connect”.

- or -

Browse to the Google Play store https://blue-

cool.webastoconnect.com/apps/android and search for

"BlueCool Connect". Alternatively scan the appropriate QR

code below.

Fig.3 Use the Apple QR code above on the left, or the Android QR code

above on the right.

To create a Webasto account:

1. Follow the on-screen instructions to create a Webasto ac-

count.

2. Log in after the account has been created.

3. Enter the relevant Device-ID to add a BlueCool Connect

device to the app.

7 App navigation

7.1 Start menu BlueCool Connect

Fig.4

Screen contents

1. Logout

2. Settings

See chapter7.2, "Settings menu BlueCool Connect" on

page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto BlueCool Connect Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info