Bedienungsanleitung Webasto Cool Top 250 (Seite 6 von 38) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

802129

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Cool Top 6

6 Configuration menu

There are several options for the Cool Top. The installer supplies a

working system with the control element configured according

the installed options.

If the system changes or a new control element need to be in-

stalled then the configuration need to be changed.

ATTENTION

If you are unfamiliar with the system then do not

change settings. Only a Webasto service workshop

can use this menu.

Result: Change of settings could lead to system malfunc-

tion.

XContact Webasto in case you have doubts about the

configuration settings.

+ XPress and hold for 3 seconds to enter the config-

uration menu

or XPress to switch between the parameters

XPress to show the current parameter setting

or XPress to change the parameter setting

XPress to save the parameter setting.

Parameter Code Parameter Name

Default Value for Cool Top

Range R/W* Description

RTC 110/140 12V

RTC 110/140 24V

RTC 110/140 12V + FA

RTC 110/140 24V + FA

RTC 190/220 12V

RTC 190/220 24V

RTC 190/220 24V + HEAT

250/300/360 24V

250/300/360 24V + HEAT

Ext External temperature sensor

(NTC3)

--- --- --- --- --- --- --- --- --- --- R Measures the external air tempera-

ture

In1 Internal temperature sensor

(NTC1)

--- --- --- --- --- --- --- --- --- --- R Measures the internal air tempera-

ture

In2 Internal auxiliary temperature

sensor (NTC4)

--- --- --- --- --- --- --- --- --- --- R Measures the Internal air tempera-

ture

Mix Supply air temperature sen-

sor (NTC2)

--- --- --- --- --- --- --- --- --- --- R Measured the supplied air tempera-

ture

Vb Vehicle battery voltage --- --- --- --- --- --- --- --- --- --- R Measures the battery voltage

Vs Sensor supply voltage (5V) --- --- --- --- --- --- --- --- --- --- R Current value measured of the sen-

sors voltage

Rel Release Software --- --- --- --- --- --- --- --- --- --- R Display 102 is version 1.02

Cnf Configuration of the operat-

ing mode

0 0 0 0 0 0 1 0 1 0-1 R/W 0 = A/C (without heating kit)

1 = HVAC (with heating kit)

Act Activation of fresh air 0 0 1 1 1 1 1 1 1 0-1 R/W 0 = Fresh air kit not present

1 = Fresh air kit present

Ntc Activation of internal auxilia-

ry temperature sensor

(NTC4)

0 0 0 0 0 0 1 0 1 0-1 R/W 0 = only internal air sensor present

1 = both internal and auxiliary air

sensors present

Bat Configuration of vehicle bat-

tery

0 1 0 1 0 1 1 1 1 0-1 R/W 0 = 12V / 1 = 24V

Blw Configuration of the blowers

mode

(ONLY for Cool Top RT-CW)

--- --- --- --- 0 0 0 --- --- 0-1 R/W 0 = 3 speeds (S1, S2 and S3)

1 = linear speed for Cool Top RT-

CW (S1, S2, S3, S4, S5 and S6)

Cmp Configuration of the com-

pressor type

--- --- --- --- 0 0 0 1 1 0-1 R/W 0 = Short time delay compressor

(Sanden, Valeo)

1 = Long time delay compressor

(Bock)

Out Exit from menu --- --- --- --- --- --- --- --- --- -- Exit from configuration menu

* R = Read only / W = Write

Tbl. 02: Control element parameters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Cool Top 250 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info