Bedienungsanleitung Webasto Dual Top Evo 8 (Seite 7 von 39) (Englisch)

802469

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Dual Top Evo 7 / 8 Function description

3.2 Winter mode (heating without hot water production)

The heater is used for providing hot air.

Heat is produced by a diesel powered burner, an electric heater, or a combination of

both.

The desired interior temperature may be adjusted by pushing button (1) or button

(2) (5 to 35 °C).

If the combustion burner is selected as heat source, the device automatically selects the

burner setting modulating between 1,500 W and 6,000 W depending on the output

requirement (calculated from difference between selected temperature and current

interior temperature).

The amount of heat is regulated to reach the pre-selected interior temperature quickly.

Then only a limited amount of power is needed to hold the interior temperature.

In case electricity is used as source of energy, the electric heater heats the air at low or

high power, depending on the selection. Electricity is taken from an external power

supply.

If the burner and the electric heater provide the heat, priority is given to the electric

heater. This means that the electric heater runs at low or high power (depending on the

selection) and the burner provides the rest of the heat if necessary.

Heating the interior is always possible with or without water in the boiler.

3.3 Winter mode (heating with hot water production)

The heater is used for heating the interior and production of hot water.

Heat is produced by a diesel powered burner, an electric heater, or a combination of

both.

The desired interior temperature may be adjusted by pushing button (1) or button

(2) (5 to 35 °C).

The water is heated up to 70 °C.

If the combustion burner is selected as heat source, the device automatically selects the

burner setting modulating between 1,500 W and 6,000 W depending on the output

requirement (calculated from difference between selected temperature and current

interior temperature).

The amount of heat is regulated to reach the pre-selected interior temperature quickly.

Then only a limited amount of power is needed to hold the interior temperature.

A water temperature sensor controls the water temperature, while an interior

temperature sensor controls the interior temperature.

Due to variable operating and environmental influences, small water temperature

deviations are possible.

In case electricity is used as source of energy, the electric heater heats the air and water

at low or high power, depending on the selection. Electricity is taken from an external

power supply.

If the burner and the electric heater provide the heat, priority is given to the electric

heater. This means that the electric heater runs at low or high power (depending on the

selection) and the burner provides the rest of the heat if necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Dual Top Evo 8 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Webasto Dual Top Evo 8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info