Bedienungsanleitung Webasto MultiControl (Seite 1 von 2) (Englisch)

802446

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1 Control Element and menu

1 Submenu name

2 Submenu symbol

3 Activated time settings

4 Time

5 Quick start button

6 Control knob

*: if installed

Heating

2 Buttons and control

Button Control and function

Quick start button (5) with status display.

Control knob (turn/push button) (6) for selection and conﬁrmation of

the selected functions.

3 Back-function

Back

Exit the selected menu with the "Back" function.

The settings are saved and the higher-level menu level is displayed.

4 Symbols

Symbol Description Symbol Description

Timer menu (programme

time setting) Ventilation menu

Heating-Normal Settings menu

Heating level Normal Heating level Eco

Heating level Boost Fan speed (level 1-4)

Add timer Activate timer

Deactivate timer Delete timer

Delete all timers Active timer

Quick start Day of the week

Time Language

Temperature unit Day/Night

System information Error message

Reset Service indicator (service

required)

To the left Attention

Symbol Description Symbol Description

Back To the right

12 hour format Symbol for conﬁrmation

Operating voltage too low ADR display

Altitude correction

At temperatures below –20 °C protective function of control element display is active.

Display and background illumination are switched off, heating status is indicated by

status of LED diode. The heater can be tuned on and off by quick start button without

any limits.

5 Switching on and off by quick start button

“Quick start” function enables heating or ventilation by simply pressing the button. Ope-

ration time, temperature and heating mode can be preset in the settings in menu item

“Setting the quick start”.

X Press quick start button (5).

Heating or ventilation starts functioning.

The quick start button (5) lights up when the heater is in operation:

■Green (Heating)

■Blue (Ventilation)

By pressing quick start button (5) heating or ventilation can be ended prematurely

at any moment.

6 Switching on and off through the menu

Switching on the heating through the menu

3Heating menu has been selected in the main menu.

X Press the control knob (6).

The heating level, required temperature and/or operation time must be set in

accordance with the installed heater. Follow the instructions displayed in the

menu.

You can select the setting by turning the control knob. You conﬁrm

selection by pressing the control knob.

The heating starts functioning as soon as all the settings have been chosen.

By pressing quick start button (4) heating can be ended prematurely at

any moment.

Setting ventilation through the main menu (optional)

3Ventilation menu has been selected in the main menu.

X Press the control knob (6).

The fan speed, required temperature and/or operation time must be set in

accordance with the installed heater. Follow the instructions displayed in the

menu.

You can select the setting by turning the control knob. You conﬁrm

selection by pressing the control knob.

The ventilation starts functioning as soon as all the settings have been cho-

sen.

By pressing quick start button (5) during functioning, ventilation can be

ended prematurely at any moment.

7 Timer

The function is not available in ARD operation (hazardous substance transporta-

tion).

3Timer menu has been selected in the main menu.

X Press the control knob (6).

”Add timer” message (if no timer has been saved yet)

appears in the display. Add timer

Timers

X Press the control k nob in order to add new timer.

In order to programme the timer you should enter the desired

day of the week and switch-on and switch-off time. Follow the

instructions displayed in the menu.

As soon as settings are entered, the programmed timer is saved

and shown in the display.

Mon 1

X Press the control knob in order to activate the programmed

timer.

“Activate” message appears in the display. Activate

Timers

X Press the control knob in order to conﬁrm activation.

Mo 1

All programmed times can be deactivated, edited or removed. If the “Timer” symbol has

been selected in the main menu, all saved timers appear in the display in chronological

order. The following functions are at the disposal after selecting the desired timer: “acti-

vate”, “deactivate”, “edit” and “delete”.

8 Important Information on Operating and Installation Instruc-

tions

DANGER

■Do not operate the heater in closed rooms due to the danger of poisoning

and suffocation.

■Always switch off the heater before refuelling.

■The improper operation, installation or repair of Webasto heaters and control

elements can cause ﬁre or the leakage of deadly carbon monoxide. This can

lead to serious injury or death.

■Webasto shall not assume liability for defects or damage that are the result

that the installation and operating instructions as well as the instructions

contained therein being disregarded.

This liability exclusion particularly applies for:

- installation by untrained personnel

- improper use

- repairs not carried out by a Webasto service workshop

- use of non-genuine parts

- Conversion of the heater without permission from Webasto

■If faulty always replace the complete control element.

9 Intended use

The control element MultiControl | SmartControl is used to operate the Webasto water

or air heaters for cabin and engine preheating.

The control element MultiControl | SmartControl is currently approved for connection to

certain Webasto water or air heaters.

Webasto MultiControl Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Webasto MultiControl

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info