717338

Weber Style 6741 Seite 31

31
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
WWW.WEBER.COM
®
31
Timer
• Timer setting range is from 1 minute up to 23 hours, 59
minutes.
• When the time displayed is above 1 hour, the time is formatted
as Hours : Minutes
• When the time displayed is below 1 hour, the time is
formatted as Minutes’ Seconds”
• To clear Timer settings, press and hold TIMER Button.
Countdown
Press UP or DOWN Buttons until desired time appears on Timer
display.
Press TIMER Button to start countdown.
To stop Timer at any time, press TIMER Button.
To restart after stopping, press TIMER Button.
Timer alert: Receiver will emit short beeps. 0:00 will flash on
display.
Press any key to stop Timer alert.
Count up
Press TIMER Button to start count up.
To stop Timer at any time, press TIMER Button.
To restart after stopping, press TIMER Button.
Timer stops at 24:00. Timer alert will beep and display will
flash.
Count up can only be started when Timer display reads 0:00.
Quick Hints for Using the Receiver:
• To activate LCD backlight at any time, press any key on
Receiver when powered ON.
• Quick scroll feature is programmed into UP and DOWN
Buttons. To scroll quickly, press and hold buttons.
• If no buttons are pressed after :05 in SET mode, the current
flashing selection will become selected by default.
• If a meat option is not selected, beef is the default selection.
• If a recommended doneness option is not selected, WELL
DONE is the default selection.
• When Probe 1 and Probe 2 are set and active, Receiver display
will alternate between both probes every :03.
• The Thermometer measures temperatures as low as 32°F
(0°C) and as high as 390°F (199°C). “LLL” will be displayed
below 32°F (0°C) and “HHH” will be displayed above 390°F
(199°C).
Receiver Range:
Receiver works within 250 feet (76 meters) of Transmitter.
Within :60 of losing a connection, the unit will alert you with
both an audio warning of 3 short beeps every :10 and a Current
Temperature reading of “---”.
To regain connection, move closer to Transmitter.
If Receiver does not reconnect within :30 of moving closer to
Transmitter, reset devices:
Power OFF Receiver, wait :05, then power ON.
Power OFF Transmitter, wait :05, then power ON.
Receiver Alerts:
• Food is within 10°F (5°C) of Target Temperature: Beeps 6x.
• Food at Target Temperature: Short repeating beeps and
flashing Quick-Read Bars and Temperature displays. Press
any key to stop alert.
• Probe disconnected: Continuous beep. Press any key to stop
alert; then reconnect Probe.
• Timer is flashing 0:00 and repeating beeps are sounding,
indicating that the time set has expired. Press any key to stop
alert.
• Receiver has been taken outside of the Transmitter range.
Refer to instructions for Receiver Range to reconnect. Press
any key to stop alert.
In order to prolong the life of this Thermometer,
Weber does NOT recommend:
• Leaving Receiver in rain.
• Submerging Receiver, Transmitter or Probes under water.
• Mixing old and new batteries or different brands of
batteries.
General Care and Usage:
• After each use, clean stainless steel Probes with hot, soapy
water and dry thoroughly. Never immerse Probes in water
while cleaning.
• Wipe the Transmitter and Receiver with damp cloth.
• To prolong the life of the Thermometer, always store indoors
between uses.
• Recommended for use with barbecues or ovens only.
• When using Thermometer with a charcoal kettle or smoker,
use care when placing lid on wire. Excessive force can crush
the wire, making it inoperable.
• Always keep the silicone plugs inserted into the jack openings
when Probes are not being used.
• Always keep all components away from contact with flames.
Direct contact with fire will cause damage to the device.
• Always keep plugs and jack openings free from water or other
fluids. Exposure to moisture can create poor connections and/
or faulty readings.
• Always power ON Receiver first, and then power ON
Transmitter; this will reduce the chances of pairing
difficulties.
m
WARNING: Keep the stainless steel probe sensors and
wires away from children.
General Troubleshooting:
Problem: Why doesn’t my screen show a “doneness” selection?
Solution: A Personalised Temperature was set, overriding
the Recommended Temperature. To reset to a Recommended
Temperature, go through the steps outlined in “Setting Target
Temperatures.”
Problem: No Current Temperature reading.
Solutions: Confirm that the Probe has not been unplugged from
the Transmitter. Insert plug if necessary to resume.
Confirm the Transmitter is working correctly. Press POWER
button ON Transmitter to reset. If LED blinks 3x, Transmitter is
working correctly. If not, reset by following the steps outlined in
Pairing Instructions.
Problem: Current Temperature reads “LLL.”
Solution: Probe temperature is below 32°F (0°C). Wait for
Probe to reach room temperature. If problem persists and
temperature is above 32°F (0°C), internal probe wire may
be damaged. Reset device. If problem persists, Contact the
Customer Service representative in your area using the contact
information on our web site. Log onto www.weber.com
®
.
Problem: Current Temperature reads “HHH.”
Solution: Probe temperature is above 390°F (199°C). Wait for
Probe to reach room temperature. If problem persists and
temperature is below 390°F (199°C), internal probe wire may
be damaged. Reset device. If problem persists, Contact the
Customer Service representative in your area using the contact
information on our web site. Log onto www.weber.com
®
.
… 31 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

weber-style-6741

Suche zurücksetzen

  • ich brauche die Bedienungsanleitung für das Weber funk Digitalthermometer Eingereicht am 3-8-2022 13:35

    Antworten Frage melden

  • Transmitter defekt!!!! kann der neu bestellt werden? modell6741 Eingereicht am 29-8-2021 12:46

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Weber Style 6741 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info