Bedienungsanleitung Weller SPI 81 (Seite 12 von 32) (Alle Sprachen)

812885

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Always place the soldering tool in the safety

rest while not in use.

Thank you for placing your trust in our company by purcha-

sing the Weller SPI soldering iron series. Production was

based on stringent quality requirements which guarantee the

perfect operation of the device.

1. Caution!

Please read these Operating Instructions and the attached

safety information carefully prior to initial operation. Failure

to observe the safety regulations results in a risk to life and

limb.

The manufacturer shall not be liable for damage resulting

from misuse of the machine or unauthorised alterations.

The Weller SPI soldering iron series corresponds to the EC

Declaration of Conformity in accordance with the basic safe-

ty requirements of Directives 2004/108/EC, 2006/95/EC and

2011/65/EU.

2. Description

SPI 15 / 12V; SPI 15 / 24V; SPI 16; SPI-27; SPI-81

Weller SPI soldering iron series is produced for the discer-

ning leisure-time electronics expert and the electrical engi-

neering industry - exactly the right soldering equipment for

professional soldering work. Robust, economical, and to be

used for versatile soldering work, these soldering irons are

ideal for manufacture and service of electronic equipment.

The industrial soldering irons of the SPI series stand out for

their strong heating elements and the wide range of solde-

ring bits available of the long-life programme class. They are

connected to supply voltage. The various output groups of

15, 25, 40, and 75 Watt can be used to perform a large range

of soldering tasks. The long-life soldering bits have been pro-

vided with a galvanically applied protective layer. This pro-

tective layer extends the service life of the soldering bits con-

siderably, and must not be destroyed by any mechanical

actions (filing, scratching, etcetera). The latest galvanising

processes assure the best possible thermal conduction of the

soldering bits. In addition, they are absolutely scale and cor-

rosion resistant.

Technical Data

Voltage Power Protection Heating Temp.

class time

SPI-16 230 V AC 15 W I 180 s 360°C

SPI-27 230 V AC 25 W I 180 s 410°C

SPI-41 230 V AC 40 W I 180 s 450°C

SPI-81 230 V AC 75W I 180 s 480°C

Soldering irons powered by mains voltage are also available

for 120 V.

3. Initial operation

Fold the soldering iron tray according to the bending templa-

te enclosed. Place the soldering iron in the safety tray. make

sure that no inflammable objects are in the vicinity of the sol-

dering iron. Verify that the supply voltage is in compliance

with the connected load of the soldering iron. Plug the mains

plug of the soldering iron into the mains socket-outlet.

The mains cable must only be plugged into the mains socket

or adapter approved for this purpose. After the required hea-

ting-up time has run down, apply some solder to the solde-

ring tip. Subsequently, soldering work can be performed.

4. Operating instructions

Change soldering tip (only when cold):

by releasing clamping screw (12) and withdrawing soldering

pin to the front.

Avoid any seizure of the soldering tips. A thin graphite layer

applied to the bit end of the soldering tip as well as frequent

removal of the soldering tip prevents unpleasant seizure. The

soldering tip can be cleaned by means of a cleaning sponge

saturated with water. Always place soldering tip during bre-

aks.

5. Extent of Delivery

Soldering iron

Tray

Operating instructions

Subject to technical alterations and amendments!

See the updated operating instructions at

www.weller-tools.com.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Weller SPI 81 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info