579832

Weller WSD 81i Seite 9

9
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
12 13
EN
EN
Thank you for the condence you have shown in buying this device.
The device has been manufactured in accordance with the most rigorous quality standards which ensure that
it operates perfectly.
These instructions contain important information which will help you to start up, operate and service the device
safely and correctly as well as to eliminate simple faults and malfunctions yourselves.
Read these instructions and the accompanying safety information carefully before starting up the
device and starting work with the device.
Keep these instructions in a place that is accessible to all users.
Warning!
Electric shock and risk of burns
Connecting the control unit incorrectly poses a risk of injury due to electric shock
and can damage the device. Risk of burns from the soldering tool while the
control unit is operating.
Carefully read the attached safety information, the safety information accompa-
nying these operating instructions as well as the operating instructions for your
control unit before putting the control unit into operation and observe the safety
precautions specied therein.
Always place the soldering tool in the safety rest while not in use.
The device has been manufactured in accordance with state-of-the-art technology and acknowledged regula-
tions concerning safety. There is nevertheless the risk of personal injury and damage to property if you fail to
observe the safety information set out in the accompanying booklet and the warnings given in these instruc-
tions. Always pass on the device to third parties together with these operating instructions.
Specied Conditions Of Use
Use the soldering station only for the purpose of soldering, as specied in the Operating Instructions.
Intended use of the soldering station/ desoldering station also includes the requirement that you
adhere to these instructions,
observe all other accompanying documents,
comply with national accident prevention guidelines applicable at the place of use.
The manufacturer will not be liable for unauthorised modications to the device.
Applied directives
This device conforms to the specications of the EC Declaration of Conformity with Directives 2004/108/
EC, 2006/95/EC and 2011/65/EU (RoHS).
Disposal
Do not dispose of electric tools together with household waste material! In observance
of European Directive 2012/19/EU on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end
of their life must be collected separately and returned to an environmentally compatible
recycling facility.
For your safety
Technical Data
Soldering station WSD 81i
Dimensions L x W x H
166 x 115 x 101 mm
(6.54 x 4.53 x 3.98 inch)
Mains supply voltage 230 V ~ 50/60 Hz | 240/120 V ~ 50/60 Hz
120 V ~ 60 Hz | 100V ~ 50/60 Hz
Power consumption 95 W
Safety class I, antistatic housing
III, Soldering tool
Fuse T500 mA (230 V / 50/60 Hz)
T1,0 A (120V / 60 Hz)
T1,25 A (100 V / 50/60 Hz)
Temperature range 50 - 450 °C
150 - 850 °F
Temperature accuracy ± 2%
Equipotential bonding Via 3.5 mm pawl socket on back of unit
(delivery form: hard grounded without jack plug)
Equipotential bonding
a
b
c
d
Four variants are possible by connecting the 3.5 mm jack socket
differently:
a Hard-grounded supplied without plug.
b Equipotential
bonding
with plug, equaliser at centre contact.
c Floating with plug
d Soft-grounded with plug and soldered resistor. Ground-
ed through selected resistor.
Warranty
Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the
buyer. This does not apply to claims by the buyer for indemnication in accordance with §§ 478, 479
BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty
has been furnished by use in writing and using the term „Warranty“.
The warranty shall be void if damage is due to improper use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
Operating instructions are available for download at www.weller-tools.com.
… 9 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Weller WSD 81i wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info