Bedienungsanleitung Westinghouse Bendan (Seite 2 von 88) (Alle Sprachen)

731504

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

GS-26-Bendan-WH14.11

TOOLS REQUIRED



1. Proceed with caution. Read all instructions before beginning the installation.

2. WARNING! This fan may be operated only with a 2-pole switch with a 3mm contact opening

each.

3. Only an authorized electrician should execute the installation.

4. The installation height, i.e. the distance between the blades and the floor, should be at least

2.3 m.

5. Always maintain the distance between the lamp and inflammable materials (curtains,

wall, etc.), as indicated on the pictogram.

6. Make sure the fan is securely fastened at the ceiling.

7. WARNING! Do not use a dimmer type switch to control the fan speed.

8. WARNING! To prevent injuries, make sure the blades are not bent and that there are no

objects with in the area of rotation.

9. WARNING! Due to European safety regulations, if the flush mount option is elected, the fan

must not be re-installed utilizing the downrod. If attempted, this may cause a serious injury.

When assembling the fan, please follow your local safety regulations.

10. WARNING: Do Not use this fan in the same room at the same time as a gas or fuel burning

fire, unless the flue has been tested under these conditions of use by a competent person.

11. This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way



and user maintenance shall not be made by children without supervision.

12. Suitable for use indoors.

13. Before disassembling light kit, make sure the power supply is disconnected from the main

supply. Power supply can be on only after installation is completed.

14. The lampshade should not be removed from the light bulb when the power supply is on.

15. Replacement of light bulb is only possible when the light kit has cooled down, and the

power supply is disconnected from the main supply.

16. Make sure the lampshade is in the fixed position when operating the product.

17. Means for all poles disconnection having a contact separation that provide full discon

nection under over voltage category III conditions must be incorporated in the fixed wiring

in accordance with national wiring rules.

18. IP20 The fan is designed for indoor use. It is not designed for installation in a bathroom or

any damp area. Please ensure that the lamp does not come into contact with water.





READ AND SAVE THESE INSTRUCTIONS

SAFETY TIPS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Westinghouse Bendan Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info