Bedienungsanleitung Whirlpool ADG 8575 (Seite 1 von 8) (Englisch)

539860

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN -1-

Chart

(see at right for options description)

PROGRAM SELECTION

BUTTON

Push “P” button (repeatedly)

until selected program number

is shown on the display

(P1...Px) - see “Table of

programs” below.

START/RESUME BUTTON

Push this button to start the selected program: the

indicator lights up and goes off at the end of the program.

When the door is opened during a washing cycle, the

cycle is temporarily paused: the Start indicator blinks.

To resume the cycle push Start button and close

the door within 3 seconds.

CANCEL/OFF BUTTON

Push this button to switch off the control panel.

If pressed when a program is running it cancels the

program ongoing draining water for 1 minute.

If pressed when the dishwasher is switched off,

it drains any possible liquids from dishwasher

(1 minute process).

1) Program data obtained under normal conditions and with default options on. Data may vary depending on ambient conditions and used options. Differences of up to

20 minutes are possible with sensor programs as a result of the appliance’s automatic calibration system.

2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on the EN/Standard

loading comparison test and other tests, contact the following address: “contact@whirlpool.com”.

Power consumption in: Left-on mode: 1.08 W / Off-mode: 0.40 W.

Table of programs

Deter-

gent

Consumption

Drying

Phase

Programs

Available

options

Loading instructions

Litres kWh

Minutes

6th Sense

PowerClean

40°-70°C

Delay

Multizone

PowerClean

Antibacterial

rinse

Use for normal soiled dishes with dried-on food.

Senses the level of soiling on the dishes and adjusts

the program accordingly. When the sensor is

detecting the soil level an animation appears in the

display and the cycle duration is updated. The

PowerClean

option is activated automatically with

this program. To deactivate, press the PowerClean

button on the control panel.

X 7.5-13 0.95-1.45 85-175 Full

Pre-Wash cold

Delay

Multizone

Crockery to be washed later. — 4.0 0.01 14-16 NO

Fragile 40°C

Delay

Multizone

Light soiling, for example glasses and cups. X 10.5 0.85 105-114 Light

Rapid 45°C

Delay

Multizone

Lightly soiled crockery, with no dried-on food. X 11.0 0.85 30-50 NO

Eco

50°C

Delay

Multizone

PowerClean

Antibacterial

rinse

Normally soiled crockery.

Standard Program the most efficient in terms of its

combined energy and water consumption.

X 9.0 0.92 240 Full

Daily 60°C

Delay

Multizone

Antibacterial

rinse

Normally soiled crockery. X 11.0 1.30 80-95 Full

Silent 50°C

Delay

Multizone

Normally soiled crockery, gentle and

quiet thanks to the lower spray pressure.

X 14.0 1.20 290-299 Light

Dual Wash

Delay

Multizone

PowerClean

Antibacterial

rinse

Full cycle with rinse steps in order to provide good

cleaning also for thoughsoiled dishes.

X 15.0 1.50 155-170 Full

5019 300 01626

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ

THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

Options and display description

THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING

ANY BUTTON EXCEPT CANCEL/OFF BUTTON. FOR ENERGY SAVING

THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER

30 SECONDS IF NO CYCLE HAS STARTED.

OPERATION

INDICATOR

A LED light projected on

the floor indicates that

the dishwasher is

working.

RINSE AID INDICATOR

When lit (at the end of the cycle), the

rinse aid dispenser needs to be refilled.

SALT INDICATOR

When lit (at the end of the cycle), the

salt reservoir needs to be refilled.

TABLET INDICATOR

See TABLET setting in

MULTIZONE description.

MULTIZONE

Allows you to choose the washing

zones. Press this button

(repeatedly) to select the wash

zones:

TABLET SETTING

This setting allows to optimize the

cycle performances according the

type of detergent used.

Push the MULTIZONE button for

3 seconds (until the indicator lights

up) if you are using the combined

detergents in tablet.

If you are using powder or gel

detergent, the Tablet indicator on

the control panel has to be off.

both racks

only upper rack

only lower rack

( - indicator lights)

POWERCLEAN

Thanks to the additional

power jets this option provides a

more intensive and powerful wash

in the lower rack, in the specific

area.

ANTIBACTERIAL RINSE

This function activates an

antibacterial rinse at the end of the

wash cycle, guaranteeing a further

reduction of bacteria. Press the

utton to activate or deactivate the

function.

This function can be used with the

programs indicated in the table of

programs. The dishwasher door

must be kept shut for the entire

duration of the program in order

to guarantee reduction of bacteria.

If the door is opened the indicator

lamp starts flashing.

DELAYED START

BUTTON

Push the button

(repeatedly) to

delay the start of

the program.

Adjustable from

1to 24 hours.

With each press of

the button, the

delayed start

indicator increases

by one hour and

after 24 restarts

from 0.

Then press the

START button.

The dishwasher will

start after the set

time.

WASH TIME DISPLAY

Indicated the cycle duration and the remaining time

(h:min).

With “Delayed start” selected it indicates the time

remaining until program start (h.00) - below 1h

(0:min).

If “Fx Ey” messages appears on the display, see page 6

- chapter “What to do if...”.

Quick reference guide

Whirlpool is a registered trademark of Whirlpool USA

Whirlpool ADG 8575 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool ADG 8575

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info