Bedienungsanleitung Whirlpool ADP 233 WH (Seite 4 von 4) (Englisch)

450672

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

WH/IV/GB

What to do if...

If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem

(* see also the corresponding chapter in the user instructions).

Problem Cause Remedy

The appliance is not

working

 No water supply.  Open the tap.

 The appliance does not load

sufficient water.

 Clean the water supply tap filter.

 Ensure there are no kinks in the water hose.

 There is a power failure.  Insert the plug into the mains socket.

 Press the Start button.

 Close the door.

 Check the domestic circuit fuse.

 Starting the selected programme.  The programme can be set to 0 to start.

If crockery is not

perfectly dry

 Insufficient rinse aid.  Increase dosage *.

 Residual water in cavities.  Load crockery at an angle.

If crockery is not

perfectly clean

 The water jet does not reach

the crockery.

 Arrange crockery so that items do not touch each

other.

Load crockery upside down.

 Insufficient detergent.  Follow recommended detergent dosage.

 Unsuitable programme.  Select a more intense wash cycle.

 Spray arms blocked.  The spray arms must be able to turn freely.

 Spray arm nozzles clogged.  Remove any impurities obstructing the water flow *.

 Incorrect detergent/detergent too old. Use a good quality detergent.

Sandy or grainy residues

 Clogged filters.  Check filters regularly/if necessary clean *.

 Filters incorrectly assembled.  Insert the filter correctly *.

Colour of plastic parts

faded

 Tomato/carrot juice,...  Depending on the material, if necessary use a

detergent with a greater whitening power.

Deposits on crockery

 removable  Streaks on the crockery/glasses.  Increase the rinse aid dosage *.

 Streaks on glasses.  Reduce the rinse aid dosage *.

 Layer of salt on crockery/glasses.  Close the salt container lid properly *.

 not removable  Insufficient water softening,

calcium deposits.

 Change water hardness setting, if necessary add

salt *.

Opaque glasses/ glasses

not sparkling

 Cannot be washed in the dishwasher.  Use suitable glasses.

Rust on cutlery

 Not made of stainless steel.  Use suitable cutlery.

Identifying appliance

faults

 The START indicator lamp flashes.  Ensure that the filter assembly is not clogged and

if necessary clean it *.

Start the programme again. Press the Start button for

2 seconds, until the Start indicator lamp switches

off. Select a new programme and press the Start

button again.

 Indicator F... (if provided).  Call the After-Sales Service.

If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the

water supply tap, then call our After-Sales Service (see guarantee).

Before contacting our After-Sales Service, take note of the following:

 The nature of the fault.

 The appliance type and model.

 The service code (the number indicated on the adhesive rating

plate) inside the door on the right-hand side.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool ADP 233 WH Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool ADP 233 WH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info