Bedienungsanleitung Whirlpool adp 2552 wh (Seite 2 von 4) (Englisch)

125117

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

1. After loading the dishwasher, close the

door properly and open the water

supply tap.

2. The dishwasher switches on

automatically as soon as the programme

selector knob is turned.

One of the

programme indicator lamps will

switch on.

3. Turn the selector knob to select the

desired programme.

The corresponding

indicator lamp lights up.

If required,

select options (if supplied).

4. Press the Start button to start the

selected programme.

The Start

indicator lamp will light up.

Once set,

the programmed data cannot be

altered by turning the programme

selector knob.

Note:

Once the Start button has been

pressed, the dishwasher memorises the

last programme selected. This

information remains in the memory even

during interruption of the power supply.

To change the programme

selected, press the Start button

for about 5 seconds. The Start

indicator lamp will switch off.

Select a new programme and

press the Start button.

Note:

If the dishwasher is switched off

during a wash programme, when

switched on again it will resume the

wash cycle from where it was

interrupted.

Only open the dishwasher door if

strictly necessary during a wash

cycle and exercise maximum

caution. Danger of scalding from

steam.

5. To indicate the end of the programme,

the Start indicator lamp switches off

and

the End indicator lamp (if fitted)

lights up

(for about 30 min.)

6. Turn the programme selector knob to the

initial position to switch off the

dishwasher (only after the Start indicator

lamp has switched off).

All the indicator

lamps switch off.

7. Open the door (warning: beware of hot

steam). Unload the lower rack before

the upper one. Close the water tap.

Upper rack

Rack height adjustment:

(The dishwasher is delivered with the

upper rack in the top position).

The rack height can also be changed

when loaded.

• To lower: pull out the

two

side

handles and gently lower the rack.

• To raise: pull up the

two

side handles

until the rack clicks into place.

• The rack must be level on both

sides.

Crockery holders:

• Down:

cups and long-stemmed glasses.

•

Up: plates.

“Flex

”: multi-purpose support

• To be used, for example, for long-

handled utensils

(arrange knives

with the blade facing downwards),

cups and glasses.

• May be used in three different

positions (see also “Dishwasher

loading instructions” on Page 4).

1. Upon the left-hand side of the rack.

2. Upside-down, towards the centre of

the rack.

3. Upside-down, towards the left side.

Glass holder:

Lower rack

Plate holders:

•(

) may be lowered to increase

available space.

Cutlery basket:

• The cutlery basket can be removed to

increase (

) available space.

• Some models are provided with a grid

(

) that can be fitted onto the cutlery

basket.

How to use the dishwasher

Please read the user instructions carefully.

Upper and lower rack

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool adp 2552 wh Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool adp 2552 wh

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info