Bedienungsanleitung Whirlpool AKP 732 (Seite 10 von 16) (Englisch)

574723

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

EN10

CONTROL PANEL DESCRIPTION

N.B.:

- If knobs on your oven are retractable, push them in the middle and they pop up.

- Your product may appear slightly different from the drawing.

1. Function selector knob

2. Thermostat knob

3. Red thermostat led

4. Hob control knobs

5. Electronic programmer

SWITCHING ON THE OVEN

Turn the selector knob to the required function. The oven light switches on.

Turn the thermostat knob clockwise to the required temperature. The red thermostat led lights up (except for the defrost function), switching off again when the oven

reaches the selected temperature. At the end of cooking, turn the knobs to “0”.

HOW TO USE THE HOB

The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different

power settings, and a series of function symbols (see the instructions supplied with the hob).

IMPORTANT:

• When using the cast iron hotplates for the first time, set the knobs to 6 and allow them to operate for approx. 3 minutes in order to eliminate odours, placing a pot

with an appropriate diameter and half full of water on each hotplate.

• Do not leave the hot plates turned on when they are empty.

• Use pots and pans specifically designed for electric hobs, particularly those with multiple layer flat-bottoms.

• Use pans whose bottom diameter is equal to that of the hotplates, or slightly larger.

USING THE ELECTRONIC PROGRAMMER

Using the oven for the first time

Setting the time of day and the tone of the acoustic signal.

Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the time of day, press buttons – and + at the same time: the central

dot flashes. Set the time of day using the buttons + and –. Having selected the desired value, press the middle button. The display shows “ton 1”. To select the desired

tone, press button –. Having selected the preferred tone, press the middle button. To change the time of day, proceed as described above.

Setting the timer

To set the timer, long-press the middle button: the display shows 0.00 and the bell symbol flashes. Set the timer using the button + (the maximum programmable

value is 23 hours and 59 minutes). The countdown begins after a few seconds. The display shows the time of day and the bell remains lit, confirming the timer has been

set. To view the countdown and change it if necessary, press the middle button again.

1. Button – : to decrease the value shown on the display

2. Button : for selecting the various settings:

a. Timer

b. Cooking time

c. Cooking end time setting

3. Button + : to increase the value shown on the display

A. The symbol indicates that the timer function is in operation

B. The AUTO symbol confirms the setting has been made

4 4 4 41 2

2 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKP 732 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKP 732

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info