Bedienungsanleitung Whirlpool AKR 680 (Seite 3 von 4) (Englisch)

108679

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Switch on the hood a few minutes before starting

to cook and leave it running for at least 5 minutes

after you have finished.

1. Pull out the steam deflector (depending on

model). This improves hood performance.

2. Turn the speed selector to the required

speed setting according to the quantity of

fumes and steam to be extracted.

3. Switch off the hood 5 minutes after you have

finished cooking.

4. Close the steam deflector (where fitted).

Always disconnect the hood by switching off the electrical power supply before

cleaning or carrying out maintenance.

Grease filter

• The sponge grease filter should be

washed in hot soapy water once a month

(soak for 1-2 hours, do not wring.

If necessary, repeat the process.

Replace with a new filter every 5-6 washes).

• The grease filter paper should be replaced

at least once a month.

• Grease filter paper with indicator should

be replaced at least every two months or

whenever the colour becomes visible

through the holes of the grille.

The paper filter is coloured on one side.

This colour should not be visible through the

grille holes when the filter is installed.

• The metal grease filter has an unlimited life

and should be washed once a month

by hand or in a dishwasher (60°C) with

appropriate detergents.

Leave filter to dry, handling it carefully

before remounting it.

Whenever cleaning or replacing the grease

filters, clean all other exposed parts of the hood.

Carbon filter

(“Air recirculation mode”, see following

page)

The carbon filter cannot be washed or

regenerated.

Replace the carbon filter (normal usage)

every 6 months (Rectangular carbon filter)

every 4 months (Circular carbon filter)

Replacing the bulbs

1. Pull out the steam deflector

(depending on model).

2. Open the grille or light fixture and remove the

grease filter.

3. Remove the burnt-out bulb and replace it with

a new one of the same wattage. Close the

grille, light fixture or metal grease filter.

Cleaning the hood

Use a soft cloth with methylated spirits or a mild

liquid detergent. Never use abrasives.

Warning!

Failure to observe the instructions for

cleaning the appliance and replacing or washing

the filters may cause a fire.

Hood does not work:

• Is the electrical power supply switched on?

• Is there a power failure?

• Has the fuse blown?

Insufficient suction power:

• Did you set the right speed?

• Do the filters need to be cleaned or replaced?

• Are the air outlets blocked?

Light does not work:

• Does the bulb need to be replaced?

• Is the bulb correctly fitted?

• Has the fuse blown?

Never try to carry out any repair

yourself other than fixing the

above-mentioned problems.

HOW TO USE THE HOOD

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

75004Agb.fm5 Page 9 Tuesday, March 27, 2001 10:55 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKR 680 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKR 680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info