Bedienungsanleitung Whirlpool AKT 326 (Seite 1 von 3) (Englisch)

662519

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

AKT 326 FRYER OPERATION

5019 300 01405

To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation.

Whirlpool is a registered trademark of Whirlpool USA

Make sure that the voltage indicated on the rating

plate corresponds to the mains voltage. The technical

data stated on the rating plate underneath the hob are

also provided on the right.

DIMENSIONS OF FRYER HOB AND WORKTOP (mm)

1. Basket with draining hook and folding handle

2. Oil tray

3. Tilting electrical heating element - 1600 W

4. Cover

5. On/Off control knob

6. Oil thermostat knob

7. Fryer On indicator light

8. Oil temperature indicator light

ELECTRICAL CONNECTION

Supply voltage Conductors: number and size

220-240 ~ +

H05 RR-F 3 x 1.5 mm

PLARD 220-240 V ~ 50/60 Hz 1.6 kW

IMPORTANT SAFETY WARNINGS

• Avoid exposing the appliance to atmospheric agents.

• Make sure children do not play with the appliance.

• Make sure that the electrical wires of other electrical

appliances near the fryer do not touch hot parts.

• Do not place plastic, aluminium foil, cloths, paper or other

flammable materials on oil while it is still hot.

• Do not introduce wet food into the fryer at any time.

• Before use, make sure that no water residue is present on

the oil tray or cover.

• Frozen foods are frequently covered with a coating of ice

which should be removed prior to frying. Lower the

basket slowly to ensure no boilover occurs.

• Never allow water near the fryer during use - risk of oil/

water spits.

• In the event of ignition, immediately douse the flames

using the fryer cover and a dry towel (do not use wet

cloths).

• The appliance must be disconnected from

the power supply before carrying out any

installation work.

•Installation and maintenance must be

carried out by a qualified technician, in

compliance with the manufacturer’s

instructions and local safety regulations.

Do not repair or replace any part of the

appliance unless specifically stated in the

user manual.

• Regulations require that the appliance is

earthed.

• For installation to comply with current

safety regulations, an all-pole disconnect

switch with minimum contact gap of 3 mm

must be utilized.

• The appliance is designed solely for

household use for cooking food. No other

type of use is permitted (e.g. heating

rooms). The Manufacturer declines all

responsibility for inappropriate use or

incorrect setting of the controls.

• The appliance and its accessible parts may

become very hot during use. Care should

be taken to avoid touching heating

elements. Children less than 8 years of age

shall be kept away unless continuously

supervised.

• This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

hazards involved. They shall not play with

the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

• The accessible parts of the appliance may

become very hot during use. Keep children

away from the appliance and supervise

them to ensure that they do not play with

it.

• During and after use, do not touch the

heating elements of the appliance.

• Overheated oils and fats catch fire easily.

Never leave the appliance unattended

when cooking with fat and oil.

• The appliance is not intended to be

operated by means of an external timer or

separate remote control system.

• Do not use steam cleaners.

• Unattended cooking on a hot with fat or oil

can be dangerous and may result in fire.

NEVER try to extinguish a fire with water,

but switch off the appliance and then cover

flame, e.g. with a lid or a fire blanket.

• Danger of fire: do not store items on the

cooking surfaces.

USING THE FRYER

FOR THE FIRST TIME

• Remove the adhesive film protecting some parts.

• Carefully remove any residual glue carefully without using

abrasive substances, to avoid scratching the surface.

• Remove the basket, raise the heating element and take

out the oil tray.

• Wash and dry the tray and the basket carefully (better in a

dishwasher).

• Reposition the basket, the tray and the heating element.

• Fill the tray with 3 litres of water.

• Turn the control knob On and the thermostat control

knob to 150°C.

• Leave the fryer on until the water boils, then turn both

knobs to the off position.

• Let the fryer cool down.

• Empty the tray and dry both tray and heating element

carefully.

• The fryer is ready for use.

FILLING WITH OIL

• Take the basket out.

• Fill the tray with about 2 litres of oil. If you use fat, melt it

before.

The level must be between the maximum and minimum

marks on the tray.

• Make sure that the heating element is completely

lowered.

Important: Never switch on the heating element when

it is out of the oil.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKT 326 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info