Bedienungsanleitung Whirlpool akt 813 ne (Seite 2 von 2) (Englisch)

336909

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

IMPORTANT: The hob’s safety features include an automatic switching off function. Prolonged use of the same heat

setting triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting, the

cooking zone switches off).

A On/Off D Key lock

B Cooking zone and timer selection F Multiple zone Activation/Deactivation

C-E Heat setting increase and decrease

Upon first installation, the control panel performs a functional test for about 1 second, after which it

automatically switches to the “Key lock” function.

To deactivate the function, press and hold button “D”; an acoustic signal will sound and the corresponding led

will turn off.

NOTE: If a reset occurs, repeat the procedure described above.

To switch the hob on, keep button “A” pressed for approx. 2 seconds. The 4 cooking zone displays show “0”.

If within 20 seconds none of the cooking zones is activated, the hob switches off automatically as a safety

precaution.

Press one of the buttons “B” corresponding to the cooking zone you intend to use.

Select the heat setting required with buttons “E” or “C”. The other selectable cooking settings go from 1 to 9.

Press buttons +/- at the same time to cancel all settings.

Pressing button “+” when level 9 is reached, the “Booster” function is activated and the letter “A” appears on

the display.

IMPORTANT: the control is deactivated 10 seconds after the heat setting has been selected. To change the

heat setting, first press the selection button “B” again, then proceed to change the setting, using buttons “E” or

“C”.

MULTIPLE ZONE: After selecting the desired zone and setting the level (as described in the previous section)

press “F”: an indicator above the button turns on, activating the additional zone. The multiple zone can only be

used if:

1) The cooking zone is provided with multiple zone;

2) The power level selected is greater than 0.

To deactivate the multiple zone, press button “B” of the desired zone, then press “F” again.

To set the Timer function, select the desired cooking zone and power setting then press the cooking zone key

again and a luminous dot will appear on the display of the timer-controlled cooking zone.

The indication “00” blinks on the 2 displays. Press buttons “C” or “E” to set the time from 1 to 99.

IMPORTANT: after 10 seconds the timer displays will show the power setting of the other cooking zones.

To view the remaining cooking time, press the timer-controlled cooking zone key twice.

The KEY LOCK function is switched on by holding down button “D” until a dot lights up above the function

button. The Key lock function locks all the hob’s other functions, with the exception of the On/Off button “A”.

The function remains on even after the hob is switched off and on again and can be deactivated by pressing button

“D” again until the dot above the function button goes off.

RESIDUAL HEAT INDICATOR

When the cooking zone is switched off, the residual heat indicator “H” remains on or flashes alternating with

“0” until the temperature of the hob returns within safety levels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool akt 813 ne Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool akt 813 ne

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info