Bedienungsanleitung Whirlpool AKZ9 6290 IX (Seite 6 von 12) (Englisch)

697003

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

. SPECIAL FUNCTIONS

AUTOMATIC CLEANING - PYRO

Remove all accessories from the oven before running

the Pyro function, including the shelf guides. If the

oven is installed below a hob, make sure that all the

burners or electric hotplates are switched off while

running the self-cleaning cycle.

For optimum cleaning results, remove the worst

soiling with a damp sponge before using the Pyro

function. Only run the Pyro function if the appliance

contains heavy soiling or gives off bad odours during

cooking.

Access special functions

and turn the knob to

select

from menu. then press to confirm.

Press

to start immediately the cleaning cycle, or

turn the knob to select the shorten cycle (ECO).

Press

to start immediately the cleaning cycle, or

press

to set the end time/start delayed.

The oven will start the cleaning cycle and the door

will be locked automatically.

The oven door cannot be opened while pyrolytic

cleaning is in progress: It will remain locked until the

temperature has returned to an acceptable level. Air

the room during and after running the Pyro cycle.

Please note: The duration and temperature of cleaning cycle

cannot be set.

. USING THE MEAT PROBE (IF PRESENT)

The meat probe supplied allows to measure the exact

internal temperature of food during cooking.

The meat probe is allowed only in some cooking

function (Conventional , Forced Air , Convention Bake

, Turbo Grill , 6th Sense Meat and 6th Sense

Maxicooking).

It is very important to position

the probe accurately in order to

obtain perfect cooking results.

Insert the probe fully into the

fleshiest part of the meat,

avoiding bones and fatty parts.

For poultry, the probe should be

inserted sideways, in the middle

of the breast, taking care to

ensure the tip does not end up in

a hollow part. In the case of meat

with very irregular thickness,

check it is cooked properly before removing it from

the oven. Connect the end of the probe in the hole

located on the right wall of the oven cavity. When the

meat probe is plugged to the oven cavity, a buzzer

sounds and the display shows icon and target

temperature.

If the meat probe is plugged during the selection of a

function, display switches to the default meat probe

target temperature.

Press

to start settings. Turn the knob to set the

meat probe target temperature. Press

to confirm.

Turn the knob to set oven cavity temperature.

Press

or to confirm and start the cooking

cycle.

During cooking cycle, the display shows meat probe

target temperature. When the meat reaches the

target temperature set, the cooking cycle stops and

the display shows “End”.

To restart the cooking cycle from “End”, by turning

the knob it is possible to adjust meat probe target

temperature as indicated above. Press

or to

confirm and restart the cooking cycle.

Please note: during cooking cycle with meat probe it

is possible turn the knob to change meat probe target

temperature. Press to adjust oven cavity temperature.

The meat probe can be inserted at any time, also during a

cooking cycle. In this case, it is necessary re-set the cooking

function parameters.

If meat probe is incompatible with a function, the oven

switch o the cooking cycle and plays an alert buzzer sound.

In this case, disconnect the meat probe or press to set

another function. Start delayed and preheat phase are not

compatible with meat probe.

. KEY LOCK

To lock the keypad, press and hold

for at least 5

seconds.

Do this again to unlock the keypad.

Please note: The key lock can also be activated while cooking

is in progress.

For safety reasons, the oven can be switched o at any time

by pressing .

Do not touch the oven during the Pyro cycle.

Keep children and animals away from the oven

during and after (until the room has nished

airing) running the Pyro cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKZ9 6290 IX Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKZ9 6290 IX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info