Bedienungsanleitung Whirlpool AKZM 8920 (Seite 15 von 31) (Englisch)

577446

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

EN14

USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND

SETTING THE TIME

For correct use of the oven, when it is switched on for the first time you will have to select the desired

language and set the correct time.

Proceed as follows:

1. Press : the display will show the list of the first three available languages.

2. Press buttons and to scroll down the list.

3. When the desired language is highlighted, press to select it.

After language selection, the display will flash 12:00.

4. Set the time using buttons and . To scroll through the numbers more quickly, keep the button

pressed.

5. Confirm your setting by pressing : the display will show the list of functions.

SELECTING COOKING FUNCTIONS

1. If the oven is off, press button ; the display will show the cooking functions.

2. To browse the various possibilities, press buttons : the selectable function is highlighted in

white in the centre of the screen.

N.B.:for the list and description of functions, see the specific table at page19 and at page24.

If the induction plate is already properly engaged or whenever the induction plate is inserted,

only Induction Functions and Settings will be accessible through the main menu.

If the induction plate is not engaged into the oven, both standard functions MENU and

induction functions MENU will be accessible.

When the induction plate is inserted or removed, a message indicating correct engagement/

disengagement will be shown on the display.

3. Select the function by pressing button : the cooking settings are displayed on the screen. If the

pre-set values are those desired, press the start button , otherwise proceed as indicated above to

change them.

SETTING THE TEMPERATURE/OUTPUT OF THE GRILL (Standard Functions only)

To change the temperature or output of the grill, proceed as follows:

1. Check that the cursor is positioned next to the temperature value (zone 1); press button to select

the parameter to be changed: the temperature values flash.

2. Use buttons to change to the desired value.

3. Press button to confirm and then press . The display indicates which shelf food should be

placed on.

4. Press to start cooking.

The set temperature can also be changed during cooking by following the same procedure.

5. At the end of cooking, the end of cooking message is displayed. At this point the oven can be

switched off by pressing , or cooking can be prolonged by pressing . When switched off, the

display shows the cooling bar which indicates the temperature inside the oven.

Note: in induction mode temperature will be automatically adjusted by the oven and does not need

to be manually set.

PREHEAT

TEMPERATURE

200°C

COOK TIME

END TIME

Forced Air

--:--

PREHEAT

TEMPERATURE

180°C

COOK TIME

END TIME

Forced Air

--:--

Insert food on level 3

Press when done

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKZM 8920 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKZM 8920

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info