Bedienungsanleitung Whirlpool ART6711SF2 (Seite 1 von 3) (Englisch)

756846

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. LED Light

2. On/Stand-by

3. Freezer and refrigerator compartment

temperature

6TH SENSE FRESH CONTROL

The appliance is automatically able to quickly reach the optimal

internal preservation temperature. The function enables to control also

the humidity of the appliance. In order for it to function correctly, the

fan must also be turned on. It is possible to turn the function on/o

(see Fan description).

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

The three LED indicators indicate the refrigerator compartment set

temperature.

It is possible to set a dierent temperature of the appliance with the

button.

The following adjustments are possible:

LEDs lit Set temperature

High (less cold)

Medium-high

Medium

Medium-low

Low (colder)

Fast cool

FAN*

The Fan is pre-set to ON. You can turn the Fan on/o by pressing the

light button (as shown in gure 2) and at the same time the button

as shown in gure 3. The light will ash just once if the Fan is OFF, or it

will ash 3 times if the Fan in ON. If the ambient temperature exceeds

27°C, or if drops of water are present on the glass shelves, it is essential

that the fan is on to ensure the proper preservation of the food.

Deactivation of the fan allows energy consumption to be optimised.

1 2 3

FAST COOL FUNCTION FAST COOLING

To quickly cool the refrigerator compartment, or

6 hours before putting a large quantity of food

to be frozen in the freezer compartment, turn

on the “Fast Cooling” function by repeatedly

pressing the button until the 3 icons ash

green and then stay constant.

The function automatically turns o after 30 hours and the

temperature returns to the previous setting when the function is

turned on.

To turn the function o manually, press the button.

Note: avoid a direct contact between the fresh food and the food that is

already frozen.

To optimize the freezing speed, the lower drawer can be removed and

the food can be placed directly on the bottom of the compartment.

* Available only on certain models

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool ART6711SF2 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool ART6711SF2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info