539834
4
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
- the sensor technology adapts drum movement, water, energy and programme duration to your wash load
5019 300 01130
Soil level” button
Adapts the programme duration to the soil level
of your laundry. Also influences the detergent
quantity recommendation when using the
“Dosing Aid” button.
= lightly soiled - = normally soiled -
= heavily soiled
Not all soil levels are selectable for each
programme.
“Spin” button (incl. “Rinse Hold” )
Select a spin speed differing from the preset
one.
Press the button to set another spin speed.
If you select spin speed “0”, the final spinning is
cancelled and the water is drained out only.
However, intermediate spin phases remain
during the rinse.
If you select “Rinse hold” , the laundry
remains in the last rinse water without
progressing to the final spin cycle, to avoid
creasing and prevent colours from changing.
To activate the “Rinse hold”, press the “Spin”
button repeatedly until the “Rinse hold” symbol
on the display lights up.
- The wash programme stops to “Rinse hold”
when the “Rinse hold” symbol on the
display blinks; the “Start/Pause” indicator
blinks as well.
- To terminate the “Rinse hold” by spinning the
laundry, press “Start/Pause” - the laundry will
be spun with the default spin speed. You can
also select another spin speed with the “Spin”
button before you start the spin cycle with
“Start/Pause”.
- To terminate the “Rinse hold” by draining the
water without spinning, press the “Spin”
button until spin speed “0” appears on the
display; then press “Start/Pause” to start the
draining.
- Do not leave the laundry to soak for too long
in the “Rinse hold” (especially silk!).
With this function you can postpone your
programme to complete at a later time: press the
button to select in how many hours the programme
shall be finished. Thus, it allows you to have your
laundry ready at a particular time and to profit from
more favourable energy rates during the night, for
example.
Do not use liquid detergent when activating this
function.
The time until the “Cycle end” can be selected in
full hour time segments (1 to 24 h). When you
press the button, the shortest possible time will
be displayed; keep on pressing the button to
loop through all the available times. To remove it
again, keep on pressing the button until you see
the value “0:00”.
When you have selected the desired time until
the “Cycle end”, press “Start/Pause” - the
countdown will begin.
During the countdown, you can still modify the
programme setting (select or deselect options,
change spin speed etc.). If the modifications
prolong the programme duration so that it
overruns the originally set time until the
“Cycle end”, the programme will start
immediately.
Sometimes the programme may finish before
the selected time until the “Cycle end” has
expired (e.g. for small loads). In this case, the
washing machine will tumble the laundry
regularly to keep it fresh, until the selected
“Cycle end” time has expired. During tumbling,
the display will show an animation. The
tumbling phase can be stopped at any time
either by pressing any button or by rotating the
programme selector; the animation will stop
and the door will unlock in about 1 minute as
indicated on the display.
With the “Dosing Aid” button, you can make your
washing machine indicate you the recommended
detergent quantity for your wash load, depending
on the soil level selected and the size of the load.
Helps to save detergent and protect the
environment and also sensitive skin by avoiding
detergent overdosing.
Before you use this function, you must adapt the
washing machine to the dosing amounts which
are recommended for the detergents you use.
Also check if your region’s water hardness
corresponds with the water hardness level “soft
of your washing machine - if not adapt it.
Select programme, options and cycle end
BEFORE using the “Dosing Aid” button.
For any details, refer to the separate “Dosing Aid”
Instructions for Use.
Before starting and after end of a programme, the
indicator lights to show that the door can be
opened. As long as a wash programme is running,
the door remains locked and must on no account
be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Reset a running
programme before the end”.
SET CYCLE END
DETERGENT DOSING
RECOMMENDATION
“DOOR OPEN” INDICATOR
The “Eco monitor” gives you a rough feedback
about the power consumption of the programme
setting you selected.
As soon as you turn the programme selector to any
programme, the “Eco monitor” is on.
.
The indicator on the left is to show that the “Eco
monitor” is active.
The four indicators next to it show the degree of
consumption: the less power your programme
setting is forecasted to consume, the less indicators
will light up. This depends on the programme,
temperature and options selected, and also on the
size of the wash load.
For that reason, the forecasted degree of power
consumption may adapt when the washing
machine detects the wash load.
Open the tap and press the “Start/Pause” button
. The “Start/Pause” indicator lights up.
When the laundry load is detected or the
programme duration is adapted, the display shows
an animation.
Prevents children from starting a wash cycle or
changing the settings of a running programme.
Cannot be activated or deactivated when the
programme selector is in the “Off/O” position.
To activate the child lock:
Turn the programme selector to a programme
position, or run a programme as usual.
Press the 2 buttons marked with the key
symbol simultaneously for at least
3 seconds. A key-like symbol will shortly appear
on the display to indicate that the child lock is
active.
Any time you try to change a programme setting
with active child lock, the display will briefly show
the key-like symbol. The programme setting cannot
be changed anymore. The only change possible is
to switch the washer off by turning the programme
selector to the “Off/O” position.
To deactivate the child lock, proceed in the same
way as for activating it.
If one of the failure indicators lights up, or in case of
any malfunction, consult the “Troubleshooting
Guide” in your Instructions for Use.
Spin speed on display blinks: Unbalance during
spinning.
The “Door open” indicator lights up. The
display shows “End”. After about a quarter of an
hour, the washing machine will switch off
completely to save energy.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
The symbol will light up at the end of the
programme if you used too much detergent. Use
less detergent next time.
1. Press the “Start/Pause” button to pause the
programme. The indicator blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The
new programme continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.
The “Reset/Drain” button cancels a running
programme.
•Press and hold the “Reset/Drain button
for a few seconds; an animation appears on the
display. The water is drained out; it may last
some time until you can open the door.
ECO MONITOR
PROGRAMME START
CHILD LOCK
FAILURE INDICATORS
PROGRAMME END
DETERGENT OVERDOSAGE INDICATOR
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME
Whirlpool is a registered trademark of Whirlpool USA
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

whirlpool-awe-5115

Suche zurücksetzen

  • Whirlpool AWE5115 Trommel blockiert
    Wie kann ich sie wieder drehen
    Eingereicht am 2-7-2023 07:36

    Antworten Frage melden
  • Bitte um Hilfe betreffs Gebrauchsanleitung Waschmaschine 5115 Whirlpool > Filter reinigen ?? Eingereicht am 28-3-2017 06:21

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Whirlpool AWE 5115 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Whirlpool AWE 5115

Whirlpool AWE 5115 Kurzanleitung - Deutsch - 2 seiten

Whirlpool AWE 5115 Kurzanleitung - Englisch - 2 seiten

Whirlpool AWE 5115 Bedienungsanleitung - Englisch - 19 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info