Bedienungsanleitung Whirlpool AWO 3485 (Seite 2 von 2) (Englisch)

630213

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

5019 301 06678

Whirlpool is a registered trademark of Whirlpool USA

Load the laundry, close the door and turn the programme selector

to the desired programme; the “Start/Pause” indicator blinks.

The temperature and spin speed shown on the display can

be altered by pressing the “Temperature” button or the

“Spin” button . If you do not use the “Dosing Aid” , add

detergent now.

When the combination of programme and additional option(s) is

not possible, the indicators switch off automatically. Unsuitable

combinations of options are deselected automatically.

“Colours 15°” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20°C).

• Not selectable for Cotton 70 - 95°C.

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 70 - 95°C.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand or

granular dirt).

• Do not use liquid detergent for the main wash when

activating the “Prewash” option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water

or for washing baby linen, and helps people with allergies.

“Soil level” button

• Adapts the programme duration to the soil level of your

laundry. Also influences the detergent quantity

recommendation when using the “Dosing Aid” button.

= lightly soiled - = normally soiled - = heavily soiled

Not all soil levels are selectable for each programme.

“Spin” button (incl. “Rinse Hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled

and the water is drained out only. However, intermediate

spin phases remain during the rinse.

• If you select “Rinse hold” , the laundry remains in the last

rinse water without progressing to the final spin cycle, to avoid

creasing and prevent colours from changing. To activate the

“Rinse hold”, press the “Spin” button repeatedly until the “Rinse

hold” symbol on the display lights up.

- The wash programme stops to “Rinse hold” when the “Rinse

hold” symbol on the display blinks; the “Start/Pause”

indicator also blinks.

- To terminate the “Rinse hold” by spinning the laundry,

press “Start/Pause” - the laundry will be spun with the

default spin speed. You can also select another spin speed

with the “Spin” button before you start the spin cycle with

“Start/Pause”.

- To terminate the “Rinse hold” by draining the water

without spinning, press the “Spin” button until spin speed

“0” appears on the display; then press “Start/Pause” to

start the draining.

- Do not leave the laundry to soak for too long in the “Rinse

hold” (especially silk!).

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

without “Rapid” with “Rapid”

Mixed 40 4.0 48 0.50 1:00 —

Cotton 95 8.0 82** 2.50 2:30 —

Cotton 60 8.0 59 1.36 2:20 1:35

Cotton 40 8.0 75 0.80 2:05 1:15

Synthetics 60 3.0 46** 0.90 1:35 1:10

Synthetics 40 3.0 42 0.50 1:20 0:55

Delicates 40 1.5 60 0.65 0:50 —

Wool/Handwash 40 1.0 45 0.55 0:40 —

White 40 8.0 77 0.85 2:20 —

Light colours 40 4.0 60 0.45 1:20 —

Dark 40 4.0 40 0.55 1:40 1:15

EcoCotton* 60 8.0 59 1.04 4:00 —

EcoCotton* 60 4.0 40 0.95 3:00*** —

EcoCotton* 40 4.0 45 0.60 3:00*** —

AquaEco 40 3.0 19 0.45 1:00 —

Speed 15 30 3.0 25 0.15 0:15 —

Jeans 40 4.0 52 0.50 1:30 1:10

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual

water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.

15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water

supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.

Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options

or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

* Reference programmes for Energy Label.

LOAD LAUNDRY, CLOSE DOOR AND SELECT

PROGRAMME

SELECT ANY DESIRED OPTION

With this function you can postpone your programme to

complete at a later time: press the button to select in how many

hours the programme shall be finished. Thus, it allows you to have

your laundry ready at a particular time and to profit from more

favourable energy rates during the night, for example.

• The time until the “Cycle end” can be selected in full hour time

segments (1 to 24 h). When you press the button, the shortest

possible time will be displayed; keep on pressing the button

to loop through all the available times. To remove it again,

keep on pressing the button until you see the value “0:00”.

• When you have selected the desired time until the “Cycle

end”, press “Start/Pause” - the countdown will begin.

• During the countdown, you can still modify the programme

setting (select or deselect options, change spin speed etc.). If

the modifications prolong the programme duration so that it

overruns the originally set time until the “Cycle end”, the

programme will start immediately.

• Sometimes the programme may finish before the selected

time until the “Cycle end” has expired (e.g. for small loads). In

this case, the washing machine will tumble the laundry

regularly to keep it fresh, until the selected “Cycle end” time

has expired. During tumbling, the display will show an

animation. The tumbling phase can be stopped at any time

either by pressing any button or by rotating the programme

selector; the animation will stop and the door will unlock in

about 1 minute as indicated on the display.

With the “Dosing Aid” button, you can make your washing machine

indicate you the recommended detergent quantity for your wash

load, depending on the soil level selected and the size of the load.

• Helps to save detergent and protect the environment and

also sensitive skin by avoiding detergent overdosing.

• Before you use this function, you must adapt the washing

machine to the dosing amounts which are recommended for

the detergents you use. Also check if your region’s water

hardness corresponds with the water hardness level “soft” of

your washing machine - if not adapt it.

• Select programme, options and cycle end BEFORE using the

“Dosing Aid” button.

For any details, refer to the separate “Dosing Aid” Instructions for Use.

Before starting and after end of a programme, the lamp lights to

show that the door can be opened. As long as a wash programme is

running, the door remains locked and must on no account be forced

open. In case you have an urgent need to open it during a running

programme, refer to “Reset a running programme before the end”.

The “Eco monitor” gives you a rough feedback about the power

consumption of the programme setting you selected.

As soon as you turn the programme selector to any programme, the

“Eco monitor” is on.

The indicator on the left is to show that the “Eco monitor” is active.

The four indicators next to it show the degree of consumption: the

less power your programme setting is forecasted to consume, the

less indicators will light up. This depends on the programme,

temperature and options selected, and also on the size of the wash

load. For that reason, the forecasted degree of power consumption

may adapt when the washing machine detects the wash load.

Open the tap and press the “Start/Pause” button . The

indicator next to the “Start/Pause” button lights up.

Activating the child lock prevents children from starting a wash

cycle or changing the settings of a running programme. The child

lock cannot be activated or deactivated when the programme

selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or

run a programme as usual.

• Press and hold the 2 buttons marked with the key symbol

simultaneously for a few seconds. A key-like symbol will shortly

appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child

lock, the display will briefly show the key-like symbol. The

programme setting cannot be changed anymore. The only change

possible is to switch the washer off by turning the programme

selector to the “Off/O” position. To deactivate the child lock:

• Press and hold again the 2 buttons marked with the key

symbol simultaneously for a few seconds.

If one of the failure indicators blinks, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient inlet water.

“Service”: failure or malfunction of an electrical

component.

“Clean pump”: waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning.

The “Door open” indicator lights up, and the display shows “End”.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

The symbol will light up at the end of the programme if you used

too much detergent. Use less detergent next time. If the symbol

lights up and the display shows “Fod”, too much foam

interrupted the wash process; refer to the “Troubleshooting

Guide” in your Instructions for Use.

1. Press the “Start/Pause” button to pause the

programme. The indicator blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

The “Reset/Drain” button cancels a programme before the end.

•Press and hold the “Reset/Drain” button for a few

seconds; an animation appears on the display. The water is

drained out; it may last some time until you can open the door.

SET CYCLE END

DETERGENT DOSING RECOMMENDATION

“DOOR OPEN” INDICATOR

ECO MONITOR

less more

PROGRAMME START

CHILD LOCK

FAILURE INDICATORS

PROGRAMME END

DETERGENT OVERDOSAGE INDICATOR

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

RESET A RUNNING PROGRAMME BEFORE

THE END

- the sensor technology adapts water, energy and programme duration to the size of your wash load.

Whirlpool AWO 3485 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AWO 3485

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info