Bedienungsanleitung Whirlpool AZB 8200 (Seite 6 von 6) (Englisch)

574791

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Dryness level

By selecting this option you can adjust the

dryness level of the laundry.

After the selection of the desired programme

you can choose the dryness level by pressing

the button.

Pressing 1 time you select a more dry level

Pressing 2 times you select a less dry level

Pressing 3 times you select again normal dry

level.

Reset

During the selection phase of the

programme, pressing this button will switch

off all settings of selected options.

During running drying cycle the pressing of

the button will stop the cycle and set the

dryer back in selection mode.

The button needs to be pressed for

3 seconds.

Key lock

For child protection reasons, this option can

be used to lock all functions of the user

interface.

To activate this option, the button needs to

be pressed for 3 seconds, until the “key”

symbol at the display appears.

To deactivate this option, press the button

until the “key” symbol disappears.

The key lock function is still active even when

the selector knob is turned to “off” “0”

position or the door is opened.

The function has to be deactivated.

Dry time adjustment

Turn the programme selector knob to

“Drying Time” position.

Press the button “Drying time” to select the

duration of cycle in ten minutes steps up to

120 minutes.

Gentle

Selecting this option will reduce the drying

temperature.

This option cannot be selected when the

option “Rapid” is selected.

Rapid

Selecting this option reduces the drying time.

This option should only be selected for cotton

programmes, with a maximum load of 3.5 kg.

The garments shall have similar size and

thickness.

Anticrease

This option can be chosen to reduce

wrinkling, when the laundry is not unloaded

directly after end of the cycle.

The drum turns from time to time for

maximum 12 hours.

It can be interrupted at any time by switching

off the dryer.

This option deactivates the “Buzzer”

function, if it is activated.

Finish in

With this function you can postpone your

programme to complete at a later time: press

the button to select in how many hours the

programme shall be finished.

 Thus, it allows you to have your laundry

ready at a particular time and to profit

from more favorable energy rates during

the night, for example.

 The “Finish in” function can be selected

in full hour time segments (1 to 24 h).

When you press the button, the shortest

possible time will be displayed; keep on

pressing the button to loop through all the

available times.

To remove it again, keep on pressing the

button until you see the value “off” “0”

position.

 When you have selected the desired

“Finish in” time, press “Start” – the

countdown will begin.

 During the countdown, you can still

modify the option setting (select or

deselect options).

 Sometimes the programme may finish

before the selected “Finish in” time has

expired (e.g. for small loads).

In this case, the dryer will tumble the

laundry regularly to keep it fresh, until the

selected “Finish in” time has expired.

During tumbling, the display will show an

animation.

The tumbling phase can be stopped at

any time either by pressing any button, by

rotating the programme selector or by

opening the door.

5019 300 01386

(Subject to technical modifications)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AZB 8200 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AZB 8200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info