Bedienungsanleitung Whirlpool BSNF 9782 (Seite 3 von 4) (Englisch)

641529

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

button for 3 seconds: the Key Lock indicator will light up and an

acoustical signal will be played.

FREEZE CONTROL

Freeze Control is an advanced technology that reduces

temperature uctuations in the whole freezer compartment to

minimum, thanks to an innovative air system, totally

independent from the fridge. Freeze burns are reduced up to

60% and food preserves its original quality and color.

To activate/deactivate the Freeze Control function simply press

the FREEZE CONTROL button.

The function works properly in a defined range of temperature:

between -22°C and -24°C. When the function is engaged and the

current temperature in the freezer is set to the warmer set point

than -22°C, the temperature is automatically set to -22°C to

match the working range.

If the function is engaged and the user modify the freezer

temperature out of the working range, the function is

automatically switched off.

In case of Fast freezing is engaged, the function “Freeze control”

is inhibited until the Fast Freezing function switched off.

6TH SENSE FRESH CONTROL

This function automatically works to ensure the optimal

conditions to preserve the stored food. If there are any

variations, 6th Sense Fresh Control immediately restores the

ideal conditions. Results are outstanding: freshness preserved at

best throughout the fridge cavity up to 4 times longer.

FAST COOL

Using Fast Cool function it is possible to increase the cooling in

the refrigerator compartment. The use of this function is

recommended when placing a very high quantity of food in the

refrigerator compartment. Press the Fast Cool button to activate

Fast Cool function. When activated, the Fast Cool indicator will

turn on. The function is automatically disabled after 6 hours, or

can be manually disabled by pressing Fast Cool button.

FAST FREEZE

The use of this function is recommended when placing a very

high quantity of food to be frozen in the freezer compartment.

24 hours before freezing fresh food, press the Freezer button to

activate the Fast Freeze function. When activated, the Fast

Freeze indicator turns on. After 24 hours place the food to be

frozen in the middle freezing zone of freezer compartment. The

function is automatically disabled after 48 hours, or can be

manually disabled by pressing Fast Freeze button.

ACTIVE 0 COMPARTMENT

The Active 0 compartment is specically designed to maintain a

low temperature and a suitable humidity level, in order to keep

foods fresher for longer (e.g. meat, sh). When deactivated, the

drawer can be used for winter fruit and vegetables.

Activating and deactivating the compartment

To activate/deactivate the Active 0 compartment, press the

dedicated button on the control panel ( indicator in the gure

below).

Active 0 compartment o: button partially lighted

Active 0 compartment on: button fully lighted

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the Service

to replace it.

Important: The refrigerator compartment light switches on when

the refrigerator door is opened. If the door is kept open for more

then 10 minutes the light will be automatically switched o.

FAN + ANTIBACTERIAL FILTER

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food.

If the appliance has the Fan it can be equipped with the

antibacterial lter.

Remove it from the box placed in the crisper drawer and insert

into the fan cover.

The replacement procedure is included in the lter box.

ALARM TABLE

ALARM TYPE Signal Cause Cure

Door open

alarm

Door open alarm indicator remains on,

the acoustical alarm is activated and

the Alarm Indicator blinks.

The Fridge or Freezer door has

remained open for more

than 2 minutes.

Close the door or press the Stop Alarm to

mute the acoustical alarm.

Temperature

alarm

The Temperature display blinks (°C)

and the Alarm Indicator remains on.

The inside temperature is not

adequate

Press the Stop Alarm button ; the acoustical

alarm stops, the Temperature Display (°C)

blinks and the Alarm Indicator remains on

until a temperature < -10°C is reached.

Antibacterial

lter alarm

The Antibacterial lter alarm indicator

lit on

Finished the validity of Antibacterial

lter..

Replace the Antibacterial lter, press the

Alarm button to reset it.

Long black-out

alarm

The Black Out Alarm icon remains on,

the Alarm indicator blinks.

Prolonged power failure, able to

cause the inside temperature to

increase to 0°C.

Press the Stop Alarm button ; the acoustical

alarm stops.

Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool BSNF 9782 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool BSNF 9782

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info