GB13
- use protective gloves.
- disconnect the appliance from the electric power supply.
GREASE FILTER
The metal grease filter has unlimited duration. It should be washed at least once a month, either by hand, or in the dishwasher (use a short cycle and low
temperature).
If washed in the dishwasher, the grease filter surface may become matt. This will not have any effect on performance.
To remove the filter, pull out the handle. After the filter has been washed and dried, replace following the inverse procedure.
REPLACING THE ALOGEN LAMPS
- Only use 20W MAX - G4 halogen lamps.
1. Disconnect the hood from the electric power supply.
2. Insert the blade of a small flat screwdriver where indicated by the three points, and with a gentle
pressure remove the light cover from its position.
3. Remove the faulty lamp and replace with a new one.
4. Replace the cover (spring lock system).
CARBON FILTER MAINTENANCE
(filter models only):
Replace the carbon filter every 4 months.
FITTING OR REPLACING THE CARBON FILTER
1. Disconnect the hood from the electric power supply.
2. Remove the grease filters.
3. If carbon filters are already present (two filters fitted, covering the protection grids of the motor
impeller) and must be replaced, turn the central handle anticlockwise to unlock them.
WARNING:
WARNING:
MAINTENANCE
