Bedienungsanleitung Whirlpool emotion 1400 (Seite 2 von 13) (Englisch)

304693

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

BEFORE USING THE WASHING MACHINE

1.Removing the packaging and inspection

• After unpacking, make sure that the washing

machine is undamaged. If in doubt, do not use the

washing machine. Contact After-Sales Service or

your local retailer

• Check that the accessories and supplied parts are

all present

• Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of children,

as they are potentially dangerous

2.Remove the transport bolts

• The washing machine is fitted with transport

bolts to avoid any possible damage to the interior

during transport. Before using the machine, it is

imperative that the transport bolts are removed

3.Install the washing machine

• Remove the protective film from the control

panel

• Move the appliance without lifting it by the

worktop

• Install the appliance on a solid and level floor

surface, preferably in a corner of the room

• Make sure that all four feet are stable and resting

on the floor and then check that the washing

machine is perfectly level (use a spirit level).

4.Water inlet

• Connect the water supply inlet hose in

accordance with the regulations of your local

water company

• Water inlet: Cold water only

• Water tap: 3/4” threaded hose

connector

• Water pressure

(flow pressure): 100-1000 kPa (1-10 bar).

5.Drain

• Connect the drain hose to the siphon or hook it

over the edge of a sink by means of the “U” bend

supplied

• If the washing machine is connected to an

integrated drainage system, ensure the latter is

equipped with a vent to avoid simultaneous

loading and draining of water (siphoning effect)

6.Electrical connection

• Electrical connections must be carried out by a

qualified technician in compliance with the

manufacturer's instructions and current standard

safety regulations

• Data regarding voltage, power consumption and

protection requirements is given on the inside of

the door.

• The appliance must be connected to the mains by

means of a socket with an earth connection in

accordance with current regulations. The

washing machine must be earthed by law. The

manufacturer declines all liability for damage to

property or injury to persons or animals due to

non-compliance with the directions given above

• Do not use extension leads or multiple sockets

• Before any maintenance on the washing machine

disconnect it from the mains supply

• After installation, access to the mains plug or to

disconnection from mains supply must be

ensured at all times via a double-pole switch

• Do not operate the washing machine if it has

been damaged during transport. Inform the

After-Sales Service

• Mains cable replacement is only to be carried out

by After-Sales Service

• The appliance must only be used in the

household for the prescribed uses

Minimum housing dimensions:

Width: 600 mm

Height: 825 mm

Depth: 600 mm

30105536aGB.fm Page 18 Thursday, December 30, 2004 10:53 AM

Black process 45.0° 100.0 LPI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool emotion 1400 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool emotion 1400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info