Bedienungsanleitung Whirlpool FFD 11469E BCV BE (Seite 1 von 4) (Englisch)

793706

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on

www.whirlpool.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed

instructions on how to remove them, see the Installation Guide.

PROGRAMME CHART

1. “ON/OFF” button

2. Programme selector

3. “Temperature” button

4. “Spin” button

5. “Start delay” button

6. “Start/Pause” button

7. Option buttons

8. “Key lock“button

INDICATORS

Door can be opened

Washing phase

Indicates washing phase of the cycle

Failure: Call Service

Refer to Troubleshooting section

Failure: Water lter clogged

Water cannot be drained; water lter

might be blocked

Failure: Water tap closed

No or not sucient inlet water. “Beep”

sound every 5 seconds.

In the event of any failures, refer to the

Troubleshooting section in USER MANUAL

CONTROL PANEL

2.1. 6.3. 4. 5.

8.7. 7.

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter - behind plinth

7. Plinth (removable)

8. Adjustable feet (4)

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover

or water softener. For a liquid detergent it is

recommended to use removable plastic partition

A (supplied) for a proper dosage. If powder

detergent is used, place the partition into slot B.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch.

Pour in softener or starch solution only up to the “max” mark.

Release button 

Press to remove tray for cleaning.



Max load 11 Kg

Power consumption in o -mode 0.5 W / in left-on mode 8 W Detergents and additives Recommended

detergent

Residual

dampness % (*)

Energy

consumption kWh

Total water lt

Laundry

temperature °C

Programme

Temperatures Max. spin

speed

(rpm

Max

load

(kg

Dura-

tion

(h : m)

Prewash Main

wash Softener Pow-

der Liquid

Setting Range

Mixed

40°C - 40°C

1000 11,0 ** –  

–



– – – –

White (Whites)

60°C - 90°C

1400 11,0 2:40 (90°)     54 1,90 100 55

Cotton

40°C - 60°C

1400 11,0 3:55 –     49 1,14 107 45

Eco 40-60 40 °C 40°C

1351 11,0 4:00 –     53 0,91 64 33

1351 5,5 3:00 –     53 0,59 62 30

1351 3 2:30 –     53 0,30 45 26

Bed linen

60°C - 60°C

1400 11,0 ** –    

– – –

–

Sport

40°C - 40°C

600 4,5 ** –  

–



– – –

–

Duvet (Duvets) 30°C - 30°C 1000 3,5 ** –  

–



– – –

–

Steam Refresh – – – 2 ** – – – – – – – – –

Spin & Drain

(Spin + Drain)

– –

1400 11,0 ** –

– – – – – – –

–

Rinse & Spin

(Rinse + Spin)

– –

1400 11,0 ** –

–



– – – – –

–

Rapid 30’

30°C - 30°C

1200 (***) 5,5 0:30 –  

–

71 0,21 50 27

20°C 20 °C - 20 °C 1400 11,0 1:50 –  

–

55 0,20 95 22

Silk

30°C - 30°C

600 (***) 1,0 ** –  

–



– – – –

Wool

40°C - 40°C

800 2,5 ** –  

–



– – – –

Delicates

30°C - 30°C

600 (***) 1,0 ** –  

–



– – – –

Synthetics

40°C - 60°C

1200 5,5 2:55 –     35 0,83 80 43

 Dosing required  Dosing optional

After programme end and spinning with maximum selectable spin speed, in default

programme setting.

The duration of the programme is shown on the display.

*** The display will show the suggested spin speed as default value.

6th Sense - the sensor technology adapts water, energy and programme duration to your

wash load.

This data may dier in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of

the programmes, without options.

The values given for programmes other than the Eco 40-60

programme are indicative only.

Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The

most ecient programme in terms of energy and water consumption for washing normally

soiled cotton laundry.

Note: spin speed values shown on the display can slightly diers from the values stated

in the table.

For all Test Institutes

Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.

Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FFD 11469E BCV BE Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FFD 11469E BCV BE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info