Bedienungsanleitung Whirlpool FFD 11469E BCV BE (Seite 7 von 12) (Französisch)

793706

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Before using the appliance, read these safety instruc-

tions. Keep them nearby for future reference. These

instructions and the appliance itself provide impor-

tant safety warnings, to be observed at all times.

The manufacturer declines any liability for failure to

observe these safety instructions, for inappropriate

use of the appliance or incorrect setting of controls.

Very young children (0-3 years) should be kept

away from the appliance. Young children (3-8years)

should be kept away from the appliance unless

continuously supervised. Children from 8years old

and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge can use this appliance only if they

are supervised or have been given instructions on

safe use and understand the hazards involved.

Children must not play with the appliance. Cleaning

and user maintenance must not be carried out by

children without supervision. Never open the door

forcibly or use it as a step.

PERMITTED USE

CAUTION: The appliance is not intended to be

operated by means of an external switching

device, such as a timer, or separate remote

controlled system.

This appliance is intended to be used in

household and similar applications such as: sta

kitchen areas in shops, oces and other working

environments; farm houses; by clients in hotels,

motels, bed & breakfast and other residential

environments; areas for communal use in blocks

of ats or in launderettes.

Do not load the machine above the maximum

capacity (kg of dry cloth) indicated in the

programme table.

This appliance is not for professional use. Do

not use the appliance outdoors.

Do not use any solvents (e.g. turpentine,

benzene), detergents containing solvents,

scouring powder, glass or general purpose

cleaners, or ammable uids; do not machine

wash fabrics that have been treated with solvents

or ammable liquids.

INSTALLATION

The appliance must be handled and installed by

two or more persons- risk of injury. Use protective

gloves to unpack and install- risk of cuts.

If you want to stack a dryer on top of your

washing machine, rst contact our After-Sales

Service or your specialist dealer to verify whether

this is possible. This is only possible if the dryer is

attached to the washing machine by means of

appropriate stacking kit available through our

After- Sales Service or your specialist dealer.

Move the appliance without lifting it by the

worktop or top lid.

Installation, including water supply (if any) and

electrical connections and repairs must be carried

out by a qualied technician. Do not repair or

replace any part of the appliance unless

specically stated in the user manual. Keep

children away from the installation site. After

unpacking the appliance, make sure that it has not

been damaged during transport. In the event of

problems, contact the dealer or your nearest

After-sales Service. Once installed, packaging

waste (plastic, styrofoam parts etc.) must be

stored out of reach of children- risk of suocation.

The appliance must be disconnected from the

power supply before any installation operation-

risk of electric shock. During installation, make

sure the appliance does not damage the power

cable - risk of re or electric shock. Only activate

the appliance when the installation has been

completed.

Do not install your appliance where it may be

exposed to extreme conditions, such as: poor

ventilation, temperatures below 5 °C or above 35 °C.

When installing the appliance make sure that

the four feet are stable and resting on the oor,

adjusting them as required, and check that the

appliance is perfectly to level using a spirit level.

If the appliance is being installed on wood or

“oating” oors (certain parquet and laminate

materials), secure a 60x60x3cm (at least) sheet

of plywood to the oor then place the appliance

on top of this.

Connect the water inlet hose(s) to the water

supply in accordance with the regulations of your

local water company.

For cold ll only models: do not connect to the

hot water supply.

For models with hot ll: the hot water inlet

temperature must not exceed 60°C.

The washing machine is tted with transport

bolts to prevent any possible damage to the

interior during transport. Before using the

machine, it is imperative that the transport bolts

are removed. After their removal, cover the

openings with the 4 enclosed plastic caps.

After installation of the device, wait a few hours

before starting it so that it acclimates to the

environmental conditions of the room.

Make sure that the ventilation openings in the

base of your washing machine (if available on

your model) are not obstructed by a carpet or

other material.

Use only new hoses to connect the appliance

to the water supply. The old hose-sets should not

be reused.

The supply water pressure must be in the 0.1-1

MPa range.

SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FFD 11469E BCV BE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FFD 11469E BCV BE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info