Bedienungsanleitung Whirlpool FSCR 10420 (Seite 7 von 54) (Englisch)

607067

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

electrical store.

For the Republic of Ireland

only

The information given in

respect of Great Britain will

frequently apply, but a third

type of plug and socket is also

used, the 2-pin, side earth

type.

Socket outlet / plug (valid

for both countries)

If the tted plug is not suitable

for your socket outlet, please

contact After-sales Service for

further instruction. Please do

not attempt to change plug

yourself. This procedure needs

to be carried out by a qualied

technician in compliance with

the manufactures instructions

and current standard safety

regulations.

CORRECT USE

Only use detergents and/or

additives that are specically

produced for domestic

washing machines/tumble

dryers.

Do not exceed the maximum

load allowed. Check the

maximum load allowed in the

programme chart.

Turn o the tap when not in

use.

WARNING

Hands shall not be inserted

into running water extracting

tub.

Do not use any solvents

(e.g. turpentine, benzene),

detergents containing

solvents, scouring powder,

glass or general purpose

The power supply ranges are

indicated on the rating plate.

Regulations require that the

appliance is earthed.

For installation to comply with

current safety regulations,

an omnipolar switch with

minimum contact gap of 3mm

is required.

If the power cable is damaged

it must be replaced with an

identical one. The power

cable must only be replaced

by a qualied technician

in compliance with the

manufacturer instruction and

current safety regulations.

Contact an authorized service

center.

The electrical components

must not be accessible to the

user after installation.

The power cable must be long

enough for connecting the

appliance, once tted in its

housing, to the main power

supply.

Do not use extension leads.

Do not pull the power supply

cable.

Do not use multiple plug

adaptors if the appliance is

tted with a plug.

For appliances with tted

plug, if the plug is not suitable

for you socket outlet, contact a

qualied technician.

Do not touch the appliance

with any wet part of the body

and do not operate it when

barefoot.

Do not operate this appliance

if it has a damaged mains cord

or plug, if it is not working

properly, or if it has been

damaged or dropped. Do not

immerse the mains cord or

plug in water. Keep the cord

away from hot surfaces.

When using a residual current

circuit breaker (RCCB), only use

a model marked with

ELECTRICAL CONNECTION

FOR GREAT BRITAIN AND

IRELAND ONLY

Fuse replacement

If the mains lead of this

appliance is tted with a BS

1363A 13amp fused plug, to

change a fuse in this type of

plug use an A.S.T.A. approved

fuse to BS 1362 type and

proceed as follows:

1. Remove the fuse cover (A)

and fuse(B).

2. Fit replacement 13A fuse

into fuse cover.

3. Ret both into plug.

Important:

The fuse cover must be

retted when changing a fuse

and if the fuse cover is lost the

plug must not be used until a

correct replacement is tted.

Correct replacement are

identied by the colour insert

or the colour embossed in

words on the base of the plug.

Replacement fuse covers

are available from your local

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR 10420 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR 10420

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info