Bedienungsanleitung Whirlpool FSCR 10433 (Seite 8 von 8) (Englisch)

607070

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Key lock

To lock the buttons and keys of the control panel against

unwanted operation.

To lock:

• The washing machine must be switched on.

• Press and hold the option button until the display

indicates that the keys are locked. The buttons and keys

are locked now; only On/O works.

If you switch the washing machine o and on again, the key

lock remains active until you unlock it.

To unlock: press and hold the option button again for at least 3

seconds, until the display indicates that the keys are unlocked.

INDICATORS

Door can be opened

Energy / Water monitor

Gives feedback about the energy and water

consumption of your programme setting.

The less indicators light up, the more economic

is your programme setting. Can still adapt after

sensing phase of laundry load.

Failure: Observe the display message.

For any failures , refer to section Troubleshooting in the

“Use and Care Guide”.

Descaling

A display message will remind you regularly to descale the washing

machine. Find descaler appropriate for the washing machine on

www.whirlpool.eu.

To cancel the display reminder, press the OK key.

Rinse hold (selectable with Spin button)

Avoids automatic spinning of the laundry at the end of the

programme. The laundry remains in the last rinse water, the

display indicates the rinse hold and the programme does not

continue.

Suitable for delicate laundry which is not appropriate for spinning,

or which should be spun with a low spin speed. Not suitable for silk.

To select “Rinse hold”:

• Press the spin button; select Rinse hold. The Rinse hold symbol on

the display lights up.

The display indicates when the programme has reached the Rinse

hold. Choose to:

• drain the water, no spin:

press the Spin button, or the UP or DOWN key, to select

spin speed “0”. Or select programme Drain. Afterwards

press Start/Pause: the water will be drained and the

programme ended.

• spin the laundry:

the default spin speed blinks - start the spin cycle by

pressing Start/Pause. Or select a dierent spin speed by

pressing the Spin button and the UP or DOWN key, and

press Start/Pause.

Finish in

Enables to have the laundry ready at a particular time by

setting a delay until end of the programme.

Choose a delay up to 23:30 hours. Only if you add detergent

manually: use powder - and not liquid - detergent with this function

to ll the detergent compartment for manual dosing.

Select programme, temperature and options.

• Press the “Finish in” button – the button lights up.

• Press UP or DOWN key to select a delay up to 23:30 hours.

• Press “Start / Pause” - the countdown of the delay starts. The

display indicates the Finish in period (= time until end of

programme), as well as the default programme duration.

• The programme starts automatically, in time to be nished at the

end of the delay period. On programme start, the delay on the

display is replaced by the current programme status.

To cancel the delay

• either press Start/Pause to cancel the delay; to start the selected

programme immediately, press Start/Pause again

• or press and hold On/O to cancel the complete programme

setting.

400010820638

MAINTENANCE AND CLEANING

AND TROUBLESHOOTING

For maintenance and cleaning, and for

troubleshooting, see the

Use and Care Guide.

The Use and Care Guide can be obtained as

follows:

• After-Sales Service; using the phone

number in the warranty booklet

• Download from the Whirlpool Website

http://docs.whirlpool.eu

CONTACTING AFTER-SALES SERVICE

Provide both numbers shown on the service sticker inside the door

when contacting the After-Sales Service team.

http://www.whirlpool.eu

The phone number can be found in the warranty booklet.

Whirlpool® is a registered trademark of Whirlpool, USA

001

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR 10433 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR 10433

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info