Bedienungsanleitung Whirlpool FSCR 80211 (Seite 17 von 54) (Englisch)

607076

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Select options, if needed

If you want to select additional options,

make sure that the options button lights

up. The options which are selectable for your

programme are indicated by lighting arrows.

Turn the knob to select the desired options.

The symbol of the selected option blinks. To

conrm it, press the knob.

Some options / functions can be selected by

directly pressing the button:

Refer to section PROGRAMMES, OPTIONS AND

FUNCTIONS for more information.

INDIVIDUAL MODE

After you have switched on the washing machine,

you are not forced to follow the GUIDED MODE.

It is up to you which order you choose to set your

programme. To do a setting, rst press the relevant

button, then turn the knob to select, and nally

press the knob to conrm.

The range of temperatures, spin speeds and

options depend on the programme selected.

Therefore it is recommended to start your setting

with selecting the programme.

6. ADD DETERGENT

• If you do not use the Dosing Aid function,

pull out the detergent dispenser and

add detergent (and additives/softener) now, as

indicated in section DETERGENT DISPENSER.

Observe the dosing recommendations on the

detergent pack. If you have selected PREWASH or

START DELAY, observe the instructions in section

PROGRAMMES, OPTIONS AND FUNCTIONS.

Afterwards carefully close the detergent

dispenser again.

• If you use the “Dosing Aid” function, add

detergent later, after you have started the

programme. Refer to section DOSING AID/DAILY

USE.

Correct dosing of detergent / additives is

important, because

• it optimizes the cleaning result

• it avoids irritating residues of surplus detergent in

your laundry

• it saves money by avoiding waste of surplus

detergent

• it protects the washing machine by avoiding

calcication of components

• it respects the environment by avoiding

unnecessary environmental burden

7. START PROGRAMME

Press and hold Start/Pause until the button

lights up solidly; the programme will start.

• If you have selected “Dosing Aid”, the washing

machine will indicate the recommended

detergent amount for your laundry load after

programme start. – Add detergent to the main

wash compartment of the detergent dispenser,

close the dispenser and press “Start/Pause” to

proceed with the programme

• If you have selected “Dosing Aid” and also

“Prewash”, add the indicated detergent amount

to the main wash compartment, and half of the

indicated detergent amount also to the Prewash

compartment.

• Close the detergent dispenser and press “Start/

Pause” to proceed with the programme. To avoid

overow, do not open the detergent dispenser

anymore.

• The remaining programme duration which is

indicated on the display can vary. Factors like

unbalance in the wash load, or foam formation,

can have an eect on the programme duration.

Whenever the remaining programme duration is

calculated newly, an animation appears on the

display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR 80211 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR 80211

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info