Bedienungsanleitung Whirlpool FSCR12430 (Seite 7 von 54) (Englisch)

650493

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Socket outlet/plug (valid for

both countries)

If the tted plug is not suitable

for your socket outlet, contact

After-Sales Service for further

instruction. Do not attempt to

change the plug yourself .This

procedure needs to be carried

out by a qualied technician in

compliance with the

manufacturer’s instructions

and current standard safety

regulations.

CORRECT USE

Do not exceed the maximum

load allowed. Check the

maximum load allowed in the

programme chart.

Turn o the tap when not in

use.

Do not use any solvents (e.g.

turpentine, benzene),

detergents containing

solvents, scouring powder,

glass or general purpose

cleaners, and ammable uids;

do not machine wash fabrics

that have been treated with

solvents or ammable liquids.

CLEANING AND

MAINTENANCE

The washing machine must be

disconnected from the power

supply before carrying out any

cleaning or maintenance

operation.

Never use steam cleaning

equipment.

Do not connect the washing

machine to a socket which can

be operated by remote control.

The power cable must be long

enough for connecting the

washing machine, once tted

in its housing, to the main

power supply.

Do not pull the power supply

cable.

If the power cable is damaged

it must be replaced with an

identical one. The power cable

must only be replaced by a

qualied technician in

compliance with the

manufacturer instruction and

current safety regulations.

Contact an authorized service

centre.

Do not operate this washing

machine if it has a damaged

mains cord or plug, if it is not

working properly, or if it has

been damaged or dropped. Do

not immerse the mains cord or

plug in water. Keep the cord

away from hot surfaces.

The electrical components

must not be accessible to the

user after installation.

Do not touch the washing

machine with any wet part of

the body and do not operate it

when barefoot.

ELECTRICAL CONNECTION

FOR GREAT BRITAIN AND

IRELAND ONLY

Fuse replacement

If the mains lead of this

washing machine is tted with

a BS 1363A 13amp fused plug,

to change a fuse in this type of

plug use an A .S .T .A . approved

fuse to BS 1362 type and

proceed as follows:

1 .Remove the fuse cover (A)

and fuse (B).

2 .Fit replacement 13A fuse

into fuse cover.

3 .Ret both into plug.

Important:

The fuse cover must be retted

when changing a fuse and if

the fuse cover is lost, the plug

must not be used until a

correct replacement is tted.

Correct replacement are

identied by the colour insert

or the colour embossed in

words on the base of the plug.

Replacement fuse covers are

available from your local

electrical store.

For the Republic of Ireland

only

The information given in

respect of Great Britain will

frequently apply, but a third

type of plug and socket is also

used, the 2-pin, side earth type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR12430 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR12430

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info