Bedienungsanleitung Whirlpool FSCR90413 (Seite 7 von 8) (Englisch)

702363

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

OPTIONS which are selectable by pressing the

Options button

Prewash

Helps to clean heavily soiled laundry by adding a prewash

phase to the wash programme selected.

Extends the programme by about 20 minutes.

Add detergent to the prewash compartment of the detergent

dispenser as well, or directly into the drum. Use powder detergent for

the main wash in order to ensure that the detergent stays in the

detergent dispenser until the start of the main wash phase.

Hot Finish

The programme ends with a warm rinse phase. This relaxes

the bres of your laundry, and the laundry feels comfortably

warm when taking it out a short time after programme end.

Bio Stains 15°

Helps to remove all kinds of stains, except grease/oil.

The programme begins with a cold water wash phase.

Extends the programme by about 10 minutes.

Pre-treatment recommended for stubborn stains.

Not selectable for Cotton 95°C.

Heavy Soil

Helps to clean heavily soiled, stained laundry by optimising

the eciency of additives for stain removal.

Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash compartment, together with your

detergent (powder only). May extend the programme by up to

15 minutes.

Appropriate for use with oxygen-based stain removers and bleaching

agents.

Chlorine or perborate bleaches must not be used!

Intensive Rinse

Helps to avoid detergent residues in the laundry by

extending the rinse phase.

Particularly suitable for washing baby laundry, for people

suering from allergies and for areas with soft water.

Rapid

Enables quicker washing.

Recommendable for only lightly soiled laundry.

Not selectable for Cotton 95°C.

FUNCTIONS

Rinse hold

Avoids automatic spinning of the laundry at the end of the

programme. The laundry remains in the last rinse water, the

display indicates the rinse hold and the programme does not

continue.

Suitable for delicate laundry which is not appropriate for spinning, or

which should be spun with a low spin speed. Not suitable for silk.

To end the “Rinse hold” function, choose between:

• drain the water, no spin:

turn the knob to select spin speed “0” and press Start/Pause:

the water will be drained and the programme ended

• spin the laundry:

the default spin speed blinks - start the spin cycle by

pressing Start/Pause. Or select a dierent spin speed by

turning the knob, press it to conrm, and press Start/Pause.

Finish in

Enables to have the laundry ready at a particular time by

setting a delay until end of the programme.

Choose a delay up to 23 hours. Do not use liquid detergent

with this function.

• Select programme, temperature and options.

• Press the “Finish in” button – the symbol over the button lights up.

• Turn the knob to select a delay up to 23 hours. Conrm the desired

delay by pressing the knob.

• When you have nished your settings, press “Start / Pause” - the

countdown of the delay starts. The display indicates that Finish in is

active and that the washing machine is in waiting mode.

• The programme starts automatically, in time to be nished at the

end of the delay period. On programme start, the delay on the

display is replaced by the remaining programme duration.

To cancel the delay

• either press “Start/Pause” to cancel the delay; to start the selected

programme immediately, press “Start/Pause” again

• or press and hold “On/O” to cancel the complete programme

setting.

Key lock

To lock the buttons and knob of the control panel against

unwanted operation.

To lock:

• The washing machine must be switched on.

• Press and hold the option key until the key symbol on the

control panel lights up. Knob and keys are locked now. Only

“On/O” works.

If you switch the washing machine o and on again, the key lock will

remain active until you unlock it.

To unlock: press and hold the option key again for at least 3 seconds,

until the key symbol goes o.

INDICATORS

Door can be opened

Failure: Observe the display message.

For any failures , refer to section Troubleshooting in the “Use

and Care Guide”.

Energy / Water monitor

Gives feedback about the energy and water consumption of

your programme setting.

The less indicators light up, the more economic is your

programme setting. Can still adapt after sensing phase of

laundry load.

Descaling

A display message will remind you regularly to descale the washing

machine. Find descaler appropriate for the washing machine on

www . whirlpool . eu.

To cancel the display reminder, press the knob.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR90413 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR90413

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info