Bedienungsanleitung Whirlpool FWGBE81496 (Seite 7 von 19) (Englisch)

702325

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

User manual

CLEAN+

Clean+ is an option working on 3 dierent levels

(Intensive, Daily and Fast) that are specially designed to

set the right washing action, depending on your cleaning

needs:

Intensive : this option is designed for high levels of

dirtiness, removing most stubborn stains.

Daily : this option is designed to remove everyday stains.

Fast : this option is designed to remove lightly soiled

stains.

INTENSIVE RINSE

By selecting this option, the eciency of the rinse is

increased and optimal detergent removal is guaranteed. It is

particularly useful for sensitive skin. Press the button once,

two or three times to select an additional 1

, 2

or 3

rinses after the standard cycle rinse and remove all traces of

detergent. Press the button again to go back to the “Normal

rinse” rinse type.

START DELAY

To set the selected programme to start at a later time,

press the button to set the desired delay time. The symbol

lights on the display when this fuction is enabled. To

cancel the delayed start, press the button again untile the

value ‚‘‘0‘‘ is shown on the display.

ON/OFF

To switch on the washing machine: press the

“ON/OFF“ button, the “Start/Pause” button light up.

To switch o the washing machine during the wash cycle,

press and hold the button for approximately 3 seconds. If

the button is pressed briey or accidentally the machine will

not switch o.

To switch o the washing machine after programme end:

press the “ON/OFF“ button until the lights go o.

KNOB

To select and conrm programmes. Turn to

select.

START/PAUSE

To start the programme, after you have nished your

settings. To pause a running programme. To continue a

paused programme.

KEY LOCK

To lock the control panel, press and hold the

“Key lock” button for approximately 3 seconds. The

symbol will light up on the display to indicate that the

control panel has been locked (with the exception of the

“ON/OFF“ button). This prevents unintentional changes

to programmes, especially with children near the machine.

To unlock the control panel, press and hold the “Key lock”

button for approximately 3 seconds .

FUNCTIONS

OPTIONS

BLEACHING

If you wish to bleach the laundry, load the washing machine

and set the “Rinse & Spin” programme.

Start the machine and wait for it to complete the rst water

lling cycle (roughly 2 minutes). Put the machine in pause

mode by pressing the “Start/Pause” button, open

the detergent drawer and pour the bleach (observe the

recommended doses indicated on the package) into the

main wash compartment where the partition was previously

mounted. Restart the cycle by pressing the “Start/Pause”

button.

If desired, it is possible to add fabric softener into the

appropriate compartment of the detergent drawer.

DEMO MODE

This function is only used for sales presentations. By this

you can interact with washing machine and see it working

without water. To enter Demo mode, switch the washing

machine ON and OFF again. Press and hold “Start/Pause”

button, then within 5 seconds press also “ON/OFF“

button and hold both buttons for 10 seconds.

To deactivate this function, switch the washing machine

OFF. Than press and hold “Start/Pause” button, within

5 seconds press also “ON/OFF“ button and hold both

buttons for 2 seconds.

! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps).

! If the selected function is incompatible with another previously set function the function will not be enabled.

FRESHCARE+

This option enhances washing performance by

generating steam to inhibit the proliferation of the main

bad odour sources inside the machine. After steam phase,

the washing machine will perform gentle tumbling through

slow rotations of the drum. FreshCare+ option starts after

the cycle ends for a maximum duration of 6h and you can

interrupt it at any time by pressing any button on control

panel or turning the knob. Wait around 5 minutes before

door can be opened.

TEMPERATURE

Every programme has a predened temperature.

If you want to change the temperature, press the

“temperature” button. The value appears on the display.

SPIN

Every programme has a predened spin speed. If you

want to change the spin speed, press the "Spin" button. The

value appears on the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FWGBE81496 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FWGBE81496

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info